Show Posts
Pages: [1] 2 3
1  Community / Exhibition / Gallery / Re: My Arduino Web Server v2.0 on: January 26, 2013, 02:23:17 pm
Love this one! Thanks for sharing, I'm gonna try out your code tonight.
2  Using Arduino / Networking, Protocols, and Devices / Re: Ethernet shield, rev1..3? on: December 13, 2012, 08:43:24 am
The one im looking at says its the latest, i can clearly see it's not cous it doesn't have the holes for the PoE module. But it has a sd-card slot and a dedicated icsp female header in the rear end. I will go for that one.
Thanks for your help pylon!


edit: here's a karma point for your collaboration smiley-wink
3  Using Arduino / Networking, Protocols, and Devices / Re: Ethernet shield, rev1..3? on: December 13, 2012, 07:41:46 am
Thanks for your replay!
It's a bit confusing, retailers says rev3 but the schematics says 06...
Could i do the conclusion that if it has a micro SD slot then its compatible with Mega?
And in the ref i see this line
Quote
The most recent revision of the board exposes the 1.0 pinout on rev 3 of the Arduino UNO board.
So if i don't have UNO rev3 i wouldn't benefit from latest rev (6)..?
4  Using Arduino / Networking, Protocols, and Devices / Ethernet shield, rev1..3? on: December 13, 2012, 03:57:50 am
Hi.
Im about to buy me an Ethernet shield for my old Mega 1280.
I see there is different revs and the older ones are really cheap. so my question is: Is there any benefits using rev 3 on my old mega board.
I tried to look in the hardware index section but there is no rev history for the ethernet shield so i cant make any comparison...

Thanks in advance!
/S
5  Forum 2005-2010 (read only) / Interfacing / Re: HiloUpgrader trouble *Solved* on: September 19, 2009, 02:51:10 pm
I found out that MFC42.dll has a close relationship with Visual C++ so I uninstalled my Visual C++, rebooted, renamed the old MFC42.dll and copied the one that I got with HiloUpgrader-v1.0.0.0-Pack and BOOM, HiloUpgrader started like a charm  8-)
6  Forum 2005-2010 (read only) / Interfacing / HiloUpgrader trouble on: September 18, 2009, 03:57:38 am
Hi!
Hope this is the correct place to ask about this.
I have the Hilo gprs module from Libelium and want to upgrade to new firmware. But when i start HiloUpgrader.exe it only trows a error on MFC42.DLL. I have tried to replace the .dll with the one followed in the HiloUpgrader-v1.0.0.0-Pack that I found on this forum with no results at all. Any one here that knows anything about this problem?
I have contacted Libelium but they say I should talk to Sagem so now im trying to get in touch with them but im testing here at the same time (Sagem support seems really slow).
7  Forum 2005-2010 (read only) / Scandinavia / Re: KonungR on: September 01, 2009, 07:05:31 am
SKÅNELAND här 8-)
8  Forum 2005-2010 (read only) / Troubleshooting / Re: Inaccurate DS1307 on: February 15, 2010, 03:34:49 am
I have SparFuns pre assembled and mine is of by 6 sec/day, will get a new crystal to see if this one is damaged.
Else i will get a DS3231, both cheaper and has a temp compensation.
9  Forum 2005-2010 (read only) / Development / Re: New GPRS module for Arduino on: October 08, 2009, 05:32:35 am
Ok Libelium isn't the best in documentations.
Have u put your module baud rate with command AT+IPR=115200 and is the shield in "USB mode" also is the hilo-upgrader the only program connected to your Arduino?

[edit]Ok nice smiley[/edit]
10  Forum 2005-2010 (read only) / Development / Re: New GPRS module for Arduino on: October 08, 2009, 04:02:00 am
Quote
I cant get the gprs module to work in standalone mode. I can send sms messages no problem using the hyperterminal and the code given in the libelium tutorial. I have the Arduino using a power adapter and the capacitor as shown but still no messages when the device is put in standalone configuration. Can anyone shed some light on this for me?  Huh

Have u read this entire thread and is your module upgraded to a newer firmware? if not u can start by doing that, upgradeing info can be found @ www.libelium.com
11  Forum 2005-2010 (read only) / Development / Re: New GPRS module for Arduino on: September 19, 2009, 02:56:16 pm
Found a solution to my problem...
http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1253264258
12  Forum 2005-2010 (read only) / Development / Re: New GPRS module for Arduino on: September 14, 2009, 01:18:36 pm
Is it only I that cant get the HiLO upgrader to work?
I have replaced the mfc42.dll tried to unregister and reregister it. rebooting computer downloading a new one same procedure and still gets

In English it says "Can't find order number"...
Any ideas? my hair is getting grayer and grayer^^
13  Forum 2005-2010 (read only) / Interfacing / Re: Arduino - to - Velleman K8064 DC-Controlled Dimmer on: February 18, 2010, 08:20:29 am
Darnit! so a load under 40W won't work that well  :'(
and we have to putt zero at around 1.7V to not get any dead time.
maybe this dimmer wasn't that good for me as it looked like....
Must start testing this shit really soon...
14  Forum 2005-2010 (read only) / Interfacing / Re: Arduino - to - Velleman K8064 DC-Controlled Dimmer on: February 18, 2010, 03:56:29 am
yo KeithB.
Did u try some electrical engineering yesterday?
I hope I get some time over this weekend to try the RC circuit.
15  Forum 2005-2010 (read only) / Interfacing / Re: Arduino - to - Velleman K8064 DC-Controlled Dimmer on: February 17, 2010, 06:44:23 am
NP KeithB  smiley-grin, what are u building? Me are gonna control the temperature in a box  smiley-razz
btw isn't cutoff frequency only for AC?
Pages: [1] 2 3