Show Posts
Pages: [1]
1  Using Arduino / Project Guidance / Re: Burning the Bootloader with Arduino v1.0.1 on: September 26, 2013, 01:01:17 pm
Thank you for the support!

I've tried it as you suggested. The reset button method did not yield any success and the attempt to burn the bootloader onto the chip produced this error:

avrdude: stk500_getsync(): not in sync: resp=0xfe

The peculiar thing is that I've changed the microprocessor in the board three times now. So I guess it's a problem with the board hardware. Maybe I broke the reset circuitry while trying to set up the Arduino as ISP?

My Arduino Duemilanove seems to work fine if I select the Arduino UNO board in the menu! I can only assume that the configuration file for the Duemilanove was changed?
2  Using Arduino / Project Guidance / Re: Burning the Bootloader with Arduino v1.0.1 on: September 25, 2013, 03:35:09 am
Hi there, mmmh, loop-back test seems to be working fine. So nothing wrong with the connection.
3  Using Arduino / Project Guidance / Re: Burning the Bootloader with Arduino v1.0.1 on: September 24, 2013, 10:56:56 am
Thank you guys for the link and explanation! Now I see that Arduino IDE uses the programmer also for burning the bootloader.
Unfortunately I believe I've actually damaged my board in the process, because the only thing I get out is this error message, no matter which of my 328-PU chips I try:

avrdude: stk500_getsync(): not in sync: resp=0x00

I've tried pressing the reset button, re-installing the driver, changing the chips and the cable - all I get is the same error message.

Any thoughts on what's causing this error after experimenting with burning bootloaders?
4  Using Arduino / Project Guidance / Burning the Bootloader with Arduino v1.0.1 on: September 20, 2013, 04:27:44 am

currently I am trying to use Arduino IDE v1.0.1 to burn bootloaders onto my Atmega328-PU following this tutorial:

A number of questions resulted from the experiments:
1) How would I burn the bootloader with Arduino as IPS? There seems to be no 'Tools > Burn Bootloader > w/ Arduino as ISP' option in Arduino 1.0.1 and probably in the later version too!

3) Is Arduino only using the programmer when I explicitly tell it to do so using File -> 'Upload with Programmer'?

2) What is the standard setting for the Programmer when I just want to program my arduino the standard way (without another arduino as IPS)? Meaning now I want to go back to programming the Arduino: What programmer should I set it to?

Advice and clarification is greatly appreciated. I guess I fried some chips in the process already...  smiley-sad

5  Development / Other Software Development / Controlling Arduino IDE remotely on: December 14, 2011, 11:48:44 am

I'd like to put an alternative GUI on top of the Arduino IDE - what would be the most straight forward approach? My first idea was to use some sort of messages to instruct compiling/uploading like UDP OSC messages. Is there anything like that implemented? Main functionality I need:
_adding code
_removing code
+selecting board and COM port

Is there something like a command line version which I could easily integrate in my project?
Thank you
6  Forum 2005-2010 (read only) / Interfacing / Re: Controlling Arduino with Squeak Etoys on: September 25, 2009, 03:45:52 am
Hey Ricardo,

awesome project and pretty much exactly what I'm looking for. Please let me know ASAP when you release it or when you need some testing.

Pages: [1]