Show Posts
Pages: 1 [2]
16  Topics / Home Automation and Networked Objects / Re: arduino+ctsensor on: November 19, 2012, 06:56:24 pm
My project is:
1-   I have 3 devices (refrigerator, washing machine and a television) I need to take a current for each device and connect it to the Arduino (done that by the ct sensor and connected them , and I want to display on the LCD how much of current I consume from the maximum to the minimum)
2-   I have 2 sources of electricity connected to the arduino : governmental and the generator (but I don’t know how to connect  them).I need when the governmental electricity goes off the higher 2 currents shown on the LCD goes off and keep the 3rd  and after discussion turn the generator on and keep the 3rd device on, and in case the governmental electricity came give it the priority.
3-   I want to use an Automatic/manual button, in case automatic is chosen the system does what is explained in (number 2) and in case of manual I can choose from the LCD from the devices on which one to turn it off.
17  Topics / Home Automation and Networked Objects / Re: arduino+ctsensor on: November 18, 2012, 07:13:20 pm
yes I know I am weak in my english langauge and thank you very much


1)my project is i have 3 material (tv,refrig,x) i want to measure the current for each ( i use CTsensor connect to arduino) http://openenergymonitor.org/emon/buildingblocks/how-to-build-an-arduino-energy-monitor-measuring-current-only

and arduino connect to lcd for display the current for each and i want to display it to high current for low current(i need the code?)

2) I want to connect two arduino electricity: electricity one state and another motor for electricity in the arduino makes a comparison with the two
state when electricity is cut electricity comes before motor must turn off both high current lcd display and remains in the 3rd turn on
  When the motor is automatically electricity I see the tv turn on and turn off the other (ie automatically)

but I did not connect two arduino and electricity to the code


3)3) I want this experience is manual so I need a button automatic / manual connect to arduino and the lcd to pushbutton to control

but I did not how I connect the button and how I control lcd

can you help me please



18  Using Arduino / Displays / control lcd on: November 18, 2012, 06:36:45 pm
how to control to lcd? i have in lcd 3 current i want to change or turn off one from lcd??
19  Using Arduino / Sensors / ct sensor help on: November 18, 2012, 05:58:13 pm
My project is when the state electricity cut i want automatic turn off the material in house so that the electricity off motor turn on so that the breaker do not cut.
i have a project to measure current of each material in house ex.: current of tv ,current of Refrigerator etc....
i solve this using current sensor .....this is true yo use that? and how it's the code to read each current and display that at lcd?? and i want to display to high current to low current?? and i want connect the state electricity and motor electricity to arduino but i don't know that because i want compare the two for the arduino know who is arrive?? and i want to make button automatic/manual because the people would you change the on to off or off to on using lcd therefor how to control to lcd to change in the ocd on to off and off to on

thank you
20  Using Arduino / Displays / display help on: November 18, 2012, 05:57:43 pm
My project is when the state electricity cut i want automatic turn off the material in house so that the electricity off motor turn on so that the breaker do not cut.
i have a project to measure current of each material in house ex.: current of tv ,current of Refrigerator etc....
i solve this using current sensor .....this is true yo use that? and how it's the code to read each current and display that at lcd?? and i want to display to high current to low current?? and i want connect the state electricity and motor electricity to arduino but i don't know that because i want compare the two for the arduino know who is arrive?? and i want to make button automatic/manual because the people would you change the on to off or off to on using lcd therefor how to control to lcd to change in the ocd on to off and off to on

thank you
21  Topics / Home Automation and Networked Objects / arduino+ctsensor on: November 18, 2012, 05:45:51 pm
My project is when the state electricity cut i want automatic turn off the material in house so that the electricity off motor turn on so that the breaker do not cut.
i have a project to measure current of each material in house ex.: current of tv ,current of Refrigerator etc....
i solve this using current sensor .....this is true yo use that? and how it's the code to read each current and display that at lcd?? and i want to display to high current to low current?? and i want connect the state electricity and motor electricity to arduino but i don't know that because i want compare the two for the arduino know who is arrive?? and i want to make button automatic/manual because the people would you change the on to off or off to on using lcd therefor how to control to lcd to change in the ocd on to off and off to on

thank you
Pages: 1 [2]