Sorry for a silly question:

Are you using this module? :
http://www.sparkfun.com/products/11125

ntmcguff,

I noticed about how tricky is to get the card correctly positioned on it...

Yes I did try to run it on StandAlone mode (aka mp3 player), same results, no sound at all (remember two modules tested, etc...)

I finally made the decision and moved to SparkFun WTV020-SD module.
(at least this one works on StandAlone mode with ALL sd's)...


I'll keep you all up-to-date about the results on using Rebel's library with it.

Sorry I originally wrote in Spanish  ( Maybe it was because of frustration    )

In English now...

I'm so sorry to tell you about none of two modules is working at all.   

I used THREE completelly NEW SD Kingston cards I got from:
(  http://www.ebay.es/itm/221194347559?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 )

Also a 1Gb Sandisk SD SanDisk from:
( http://www.ebay.es/itm/160983521327?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649  )

On the TWO modules I got from:
( http://www.ebay.es/itm/150916490980?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649  )
(v.1.5 powered 3.3v from Arduino Leonardo power output).

...and nothing on the speaker, not even a single click.

I think I'll move my project to a different device (maybe the one from SparkFun).
Current ones make me feel NO confidence on them at all.

NOTE:
The TWO modules, Kingston and Sandisk SDs are available to you for running tests, just let me know...


Ciao,
Rafa.

[Jumper : 3.3 or 5 v SD: Brand, Size, Format...AD4 files: Speed, Rate, etc...]

For the experiences I've read about this module....
Could it be possible to Sumarize your experiences and configuration??
(I'm getting frustrated because of wrong SDs -I've already checked 4-)

Jumper : 3.3 or 5 v
SD: Brand, Size, Format...
AD4 files: Speed, Rate, etc...

I think this will be a really usefull way to help new users for this module to be sucessful on their attemps.

NOTE:
And... Why not have that information populated under its own topic. "Audio players", "WTV020-SD-16P"

Got them... Thanks Sir!.

Shared it on gallery section. Look for v laser gun.

Sorry for this silly question.... but,   I'm unable to find the files.

Any ideas where have they gone ??

Gracias,
Rafa.

Vale...

Me respondo yo mismo (al fin lo he encontrado):

lcd.write(XXX);

donde XXX es el código en decimal del carácter a representar.

Hola,

Querría sacar carácteres como el 126 (->), el 127 (<-), etc en el LCD, pero no sé como pasarle al orden al comando lcd.print

Siento que esta petción sea tan básica, pero... ¿Me lo podéis explicar?

Gracias,
Rafa.

Hi,
I've been reading posts for about 3 days and I can't get trough about a simple question:
Can the integrated USB port be used for communicating to PC (not for programming, I mean)  ??

Hola,
He estado leyendo durante 3 días mensajes y no consigo encontrar respuesta a una pregunta sencilla:
Puede usarse el puerto USB implementado para comunicarse con un PC (no sólo para su programación) ??


Thanks for helping,
Gracias por vuestra ayuda,

Rafa.

Hola,

Respecto al DS18B20, tengo unas preguntillas:

• ¿A qué distancia máxima se le puede poner desde el Arduino?
  
• ¿Sería necesario usar cable con blindaje (apantallamiento interno) para largas distancias  (30mts) ?
  

Gracias por vuestra ayuda.

Hi all,

I just had the same issue with that example...

I fixed by increasin 1 up the assigned numbers for each customized character, that means, leaving 0 unused.
So, first customized character in my case is 1.

Obviously, I had all refences changed to fit the proper character numbers.

Cheers,
Rafa.

Hi Rebel, (and all the readers aswell...  )

I downloaded right now the library and when unpacked I see TWO identical files.

One of them named: Wtv020sd16p.cpp
Another one named: Wtv020sd16p.cpp~
Both them 2183bytes.

Is that correct??

Gracias,
Rafa.