Show Posts
Pages: [1]
1  Community / Products and Services / VisBee - Visualization system for HMI and SCADA on: December 13, 2013, 06:56:59 am
Hi All,

Finally we released the driver script to communicate between ARDUINO and our visualization Software VisBee.
It’s a fully loaded Visualization system for HMI and SCADA.

You can download the Software without any restrictions at www.visbee.de (english version)

To use it in industrial environments you need to order a licence. Bit arduino fans will get a
high-end-visu-software for a small price.
The is a extra version for ARDUINO - Fans ;-)  (VisBee-light)

Have fun!

If you have further questions let me know.....

BR,
Chris
2  Using Arduino / Interfacing w/ Software on the Computer / Re: Communication with arduino and OPC/SCADA? on: December 13, 2013, 06:53:24 am
Hi,

congrats to idle, nice work -ArduinoOPC -

I guess we are to late with integrating our Ardiuno script to communicate from VisBee to Arduino on direct way  smiley-confuse

Anyway, with VisBee Visualisation you naw have to possibilities to communicate with Arduino Hardware.

1) Arduino OPC by ilde
2) Direkt with VisBee Skript (http://www.visbee.de)

However, have fun with your Arduino !

- VisBee
3  Using Arduino / Interfacing w/ Software on the Computer / Re: Communication with arduino and OPC/SCADA? on: February 21, 2013, 04:02:32 am
What a shame VisBee only seems to operate on microsoft windows, I hope you are also looking to have it operate on other OS's.

Just like 'Citect SCADA' and the Allen Bradley RSLogix range of software products, they all only operate on windows, and this is the only reason I keep a windows image available in VirtualBox environment. I feel irked by having to keep software like this for work I do in Industrial Automation.

How wonderful it would be if we could have our operating system of choice and be able to use some of these programs.

Chris, a problem with your 'visbee' web site. If go to this page http://www.visbee.de/Christ/Christ-Elektronik/ and then select the English flag at the top of the page for English then all I get is a blank page. There are other pages that do the same, you will need to check to find out which pages do not work.

Paul

Hi Paul, thx for the infos! Ich will check the "Error" at our page.....

VisBee: thanks for your Feedback in this point, I will forward it to the "special forces team"

CU,
Chris
4  Using Arduino / Interfacing w/ Software on the Computer / Re: Communication with arduino and OPC/SCADA? on: February 15, 2013, 06:23:45 am
Sure I will,

our software engineer working on it.

BR,
Chris
5  Community / Products and Services / VisBee - Visualization system for HMI and SCADA on: February 14, 2013, 06:05:27 am

Sorry for the confusion,
the Software is Free. Only the generated runtime application has the restriction of 15 minutes. Arduino user you can use the "light" runtime license. The driver will be ready during next month.

BR,
Chris
 
6  Using Arduino / Project Guidance / Re: temperature monitoring on: February 12, 2013, 09:31:17 am
Hi All,

for HMI visualization you can use our Software VisBee.
Actually  we are working on the driver to communicate between ARDUINO and our visualization Software VisBee.
MODBUS (and others) is already working.

It’s a fully loaded professional Visualization system for HMI and SCADA.

You can download the Software without any restrictions at www.visbee.de (english version)

The is a extra version for ARDUINO - Fans ;-)  (VisBee-light)

The driver will be available during march/april 2013.

If you have further questions let me know.....

BR,
Chris
7  Using Arduino / Project Guidance / Re: Interfacing Arduino with an HMI on: February 12, 2013, 09:27:15 am
Hi All,

for HMI visualization you can use our Software VisBee.
Actually  we are working on the driver to communicate between ARDUINO and our visualization Software VisBee.
MODBUS (and others) is already working.

It’s a fully loaded professional Visualization system for HMI and SCADA.

You can download the Software without any restrictions at www.visbee.de (english version)

The is a extra version for ARDUINO - Fans ;-)  (VisBee-light)

The driver will be available during march/april 2013.

If you have further questions let me know.....

BR,
Chris
8  Using Arduino / Networking, Protocols, and Devices / Re: MODBUS setup tutorial on: February 12, 2013, 09:24:25 am
Hi All,

if you setup a MODBUS you can try our HMI-Software VisBee.

Actually  we are working on the driver to communicate between ARDUINO and our visualization Software VisBee.
MODBUS (and others) is already running.
It’s a fully loaded Visualization system for HMI and SCADA.

You can download the Software without any restrictions at www.visbee.de (english version)

The is a extra version for ARDUINO - Fans ;-)  (VisBee-light)

The ARDUINO-driver will be available during march/april 2013.

If you have further questions let me know.....

BR,
Chris
9  Using Arduino / Interfacing w/ Software on the Computer / Re: Communication with arduino and OPC/SCADA? on: February 12, 2013, 09:17:35 am
Hi All,

actually  we are working on the driver to communicate between ARDUINO and our visualization Software VisBee.
It’s a fully loaded Visualization system for HMI and SCADA.

You can download the Software without any restrictions at www.visbee.de (english version)

The is a extra version for ARDUINO - Fans ;-)  (VisBee-light)

The driver will be available during march/april 2013.

If you have further questions let me know.....

BR,
Chris
10  Community / Products and Services / VisBee - Visualization system for HMI and SCADA on: February 12, 2013, 09:14:49 am
Hi All,

Actually  we are working on the driver to communicate between ARDUINO and our visualization Software VisBee.
It’s a fully loaded Visualization system for HMI and SCADA.

You can download the Software without any restrictions at www.visbee.de (english version)

The is a extra version for ARDUINO - Fans ;-)  (VisBee-light)

The driver will be available during march/april 2013.

If you have further questions let me know.....

BR,
Chris
Pages: [1]