Show Posts
Pages: [1]
1  Products / Arduino GSM Shield / Re: problem with sim card on: April 13, 2013, 06:37:56 am
Hi
when I changed  the line:

GSM gsmAccess();
for
GSM gsmAccess(true);

in serial monitor asked for this information:
----------------------------
Enter your APN: internet
Now, enter your login: tmn
Finally, enter your password:
-------------------
after entering data work perfectly for ever... smiley
2  Products / Arduino GSM Shield / Re: problem with sim card on: March 19, 2013, 12:55:55 pm
Hi  smiley
incredible! Now everything works and no longer need to put the "true" code in "GSM gsmAccess()"

gsmscannetworks dump:
--------------------------------
GSM networks scanner
Modem IMEI: 359231038082408
Scanning available networks. May take some seconds.
> TMN
> OPTIMUS

Current carrier: TMN
Signal Strength: 16 [0-31]
Scanning available networks. May take some seconds.
> TMN
----------------------------------------------------------
thanks
 smiley smiley smiley
3  Products / Arduino GSM Shield / Re: problem with sim card on: March 19, 2013, 10:39:38 am
Hi smiley
this is the dumping:
--------------------------
Connecting GSM network...AT%13%
0 9>AT%13%%13%%10%OK%13%%10%
AT+CGREG?%13%
9 40>AT+CGREG?%13%%13%%10%+CGREG: 0,2%13%%10%%13%%10%OK%13%%10%
AT+CGREG?%13%
40 71>AT+CGREG?%13%%13%%10%+CGREG: 0,2%13%%10%%13%%10%OK%13%%10%
AT+CGREG?%13%
85 116>AT+CGREG?%13%%13%%10%+CGREG: 0,2%13%%10%%13%%10%OK%13%%10%
AT+CGREG?%13%
116 19>AT+CGREG?%13%%13%%10%+CGREG: 0,1%13%%10%%13%%10%OK%13%%10%
AT+IFC=1,1%13%
19 36>AT+IFC=1,1%13%%13%%10%OK%13%%10%
AT+CMGF=1%13%
36 52>AT+CMGF=1%13%%13%%10%OK%13%%10%
AT+CLIP=1%13%
52 68>AT+CLIP=1%13%%13%%10%OK%13%%10%
ATE0%13%
68 79>ATE0%13%%13%%10%OK%13%%10%
AT+COLP=1%13%
79 85>%13%%10%OK%13%%10%
OK
Enter your APN: internet
Now, enter your login: tmn
Finally, enter your password: Attaching to GPRS with your APN...
AT+CGATT=1%13%
85 91>%13%%10%OK%13%%10%
AT+QIFGCNT=0%13%
91 97>%13%%10%OK%13%%10%
AT+QICSGP=1,"internet","tmn","tmnnet"%13%
97 103>%13%%10%OK%13%%10%
AT+QIMUX=0%13%
103 109>%13%%10%OK%13%%10%
AT+QIMODE=1%13%
109 115>%13%%10%OK%13%%10%
AT+QINDI=1%13%
115 121>%13%%10%OK%13%%10%
AT+QIREGAPP%13%
121 127>%13%%10%OK%13%%10%
AT+QIACT%13%
127 5>%13%%10%OK%13%%10%
OK
If your carrier uses a proxy, enter it, if not press enter:
-------------------------------------------------------------------
4  Products / Arduino GSM Shield / Re: problem with sim card on: March 19, 2013, 04:48:58 am
Thanks.

when I load the example "testemodem" shows me this:
Starting modem test...modem.begin() succeeded
Checking IMEI...Modem's IMEI:
359231038082408
Resetting modem...Modem is functoning properly

when I load the example "gsmscannetworks"  or other shows me this:
"GSM networks scanner"
and do not go to the next step


when I load the example "pinmanagement" shows me this:
Change PIN example

PIN & PUK locked. Use PIN2/PUK2 in a mobile phone.

Note: the simcard has no pin code and  works well on a mobile phone...
5  Products / Arduino GSM Shield / problem with sim card on: March 18, 2013, 04:44:52 pm
Hi
I can use another sim card from a Portuguese network (TMN) to send and receive sms and internet?
I use arduino uno r3 and the last Arduino GSM Shield
Pages: [1]