Show Posts
Pages: [1] 2
1  Using Arduino / Project Guidance / arduino to interface with pc via ppm 3.5mm jack and spp software on: August 18, 2013, 09:33:49 pm
i have a uno, and some rc stuff
i have a spektrum basic 4 ch tx and a 6ch rx, the transmitter does not have a trainer output port, and to use my transmitter with a rc sim called helisim
it needs the trainer port output,
im curious if possible, can i connect the receiver to my arduino, and have my arduino output ppm signal over a 3.5mm stereo headphone jack connect ot the mic input of my pc, with spp software and ppjoy running to convert and manage signals and controls
2  Using Arduino / Project Guidance / Re: uno r3, dfr lcd keypad shield, and a servo... how to control? on: April 13, 2013, 09:16:02 pm
this is a setup i made that does what i want it to do remotely,
but im making a small portable demo to show my friends and such and i just want to be able to use the lcd's keypad buttons to control demo servo's made to be like a camera mount, and possibly have the results of each keypress display on lcd, but dont want to push it.. lol

http://fritzing.org/projects/teleduino-controlled-pantilt-servo-webcam-mount/
3  Using Arduino / Project Guidance / Re: uno r3, dfr lcd keypad shield, and a servo... how to control? on: April 12, 2013, 06:42:37 pm
will do that shortly, but i thought i did,
how would i know what works and wont work
??
4  Using Arduino / Project Guidance / Re: uno r3, dfr lcd keypad shield, and a servo... how to control? on: April 12, 2013, 01:13:30 pm
Well,  my lcd keypad shield is not a genuine dfr, it's a Chinese clone shield that has the same lcd control pins as a dfr unit (8,9,4,5,6,7) and the buttons are tied to analog0, other then that, I know nothing more about it, but I have had the lcd working with various tests including hello world and buttons display text
5  Using Arduino / Project Guidance / Re: uno r3, dfr lcd keypad shield, and a servo... how to control? on: April 12, 2013, 09:27:38 am
these are hobby grade rc servos that get a pwm signal input, i was under the impression that the arduino uno can control these servos via a pwm output command on one of the pwm pins (3,5,6,9,10,11), as i have the "Teleduino" ethernetclientproxy sketch installed currently, and it controls these 2 servos just fine,
6  Using Arduino / Project Guidance / Re: uno r3, dfr lcd keypad shield, and a servo... how to control? on: April 12, 2013, 08:50:33 am
my servos are getting power from a seperate 5v 5a input, the servo grounds are tied to arduino ground and power input ground, my servo signals are attached to available output pins
7  Using Arduino / Project Guidance / Re: uno r3, dfr lcd keypad shield, and a servo... how to control? on: April 12, 2013, 08:43:50 am
that sounds a tad complicated to my thought of = the keypad lcd shield i bought has 5 keys i can use, they are tied to analog0 and they output different values for each press, i want left and right, up and down keypad button press values to return a servo movement value indicated by the direction button pressed, i was under the impression that it would be simple sketch coding to translate say the left button pressed value to move the servo left certain value
8  Using Arduino / Project Guidance / uno r3, dfr lcd keypad shield, and a servo... how to control? on: April 12, 2013, 07:35:46 am
so i have my uno r3, my 16x2 lcd keypad shield, and 2 servo's
what i want, is to be able to control servo-0 with left and right on the keypad
control servo-1 with up and down on keypad, and center out the servo's on keypad select button
9  Using Arduino / Project Guidance / Re: teleduino pan tilt html question on: April 10, 2013, 05:18:14 pm
so ive been messing with Fritzing for PC, and i have made the sketch for my pan tilt control system
ill upload to my website the sketch and photo, and link here..
as well i will also post my html code and parts list
if anyone wants to build from this, feel free, please just click the thanks or karma if so smiley

this is just basic, you can go ahead and improve upon it if you wish as this is all open source smiley-wink

http://fritzing.org/projects/teleduino-controlled-pantilt-servo-webcam-mount/
10  Using Arduino / Project Guidance / Re: teleduino pan tilt html question on: April 09, 2013, 12:18:43 am
I have the camera off, it's night out and raining,  so everything has been brought inside
11  Using Arduino / Project Guidance / Re: teleduino pan tilt html question on: April 08, 2013, 11:07:21 pm
http://tnap1979.net/camcontrol.html
12  Using Arduino / Project Guidance / Re: teleduino pan tilt html question on: April 08, 2013, 10:59:27 pm
there we go guys, mind testing the page and see if the same results come back ( zoomkat ) and anyone else
the html code has been tweaked and is more to my liking now..
this is just the base tho, it will be a W.I.P. smiley
13  Using Arduino / Project Guidance / Re: teleduino pan tilt html question on: April 08, 2013, 06:02:00 am
See the odd part is, zoomkat is the only one so far out of all I have had test the page that has had that error,
But since those extra commands seem like they will help,  I'll most likely add the php one to the strings and see what happens, 
I've been working on prettying up the html code I'll post results once I'm happy with it :-)
Doing a lot of html code reading to figure things out better
14  Using Arduino / Project Guidance / Re: teleduino pan tilt html question on: April 06, 2013, 03:53:12 pm
it works fine for me, running win7 pro 64bit, google chrome browser, and all current silverlight/java/flash updates and such
and its also worked for my brother and a few other friends
15  Using Arduino / Project Guidance / Re: teleduino pan tilt html question on: April 06, 2013, 03:10:47 pm
thanks zoomkat smiley
here is what ive got so far done, this is still just rough page, but it will get tuned out better in time, gotta do family stuff for a few hours

www.tnap1979.net/camcontrol.html
Pages: [1] 2