Show Posts
Pages: [1]
1  Using Arduino / Networking, Protocols, and Devices / Re: Atmel LightWeight Mesh stack ported to Arduino! Range Testing + OTAU built in on: April 22, 2013, 10:36:34 pm
We just made a demo application that shows how the miniSWARM can be connected to the web via a Wifi shield. It's basically a gateway from the LightWeight Mesh network to a Wifi access point.
2  Community / Products and Services / Re: miniSWARM - Arduino + RF Mesh+ LiPo with bulit in range test and OTAU on: April 22, 2013, 10:35:10 pm
Quick update: we made a demo aap showing how the miniSWARM can be connected to the web via a Wifi shield - check out the page for a video.
3  Community / Products and Services / miniSWARM - Arduino + RF Mesh+ LiPo with bulit in range test and OTAU on: April 08, 2013, 11:10:17 pm
The miniSWARM (Scalable Wireless Arduino Radio Module) is a new low-cost wireless Arduino development platform we're developing. We've crammed an ATmega128RFA1, USB connectivity, LiPo battery charger, chip antenna with a U.FL connector for an optional external antenna... all onto a USB stick-sized development board. It's fully Arduino compatible and we were able to dramatically drive the cost of wireless down by using the on-board 802.15.4 transceiver and the V-USB library for the bootloader/serial interface. On top of that we ported Atmel's new LightWeight Mesh stack to Arduino (more details in the Networking forum -  http://arduino.cc/forum/index.php/topic,159324.0.html).

Please check out our campaign for more technical details and to see what the miniSWARM can do :-). Cheers!

http://www.indiegogo.com/projects/miniswarm-scalable-wireless-arduino-radio-module/x/2714522

4  Using Arduino / Networking, Protocols, and Devices / Atmel LightWeight Mesh stack ported to Arduino! Range Testing + OTAU built in on: April 08, 2013, 10:52:50 pm
Hi everyone, I've been working with a small team to port Atmel's LightWeight Mesh stack to Arduino. LightWeight Mesh (http://www.atmel.com/tools/LIGHTWEIGHT_MESH.aspx) is a small-footprint wireless mesh networking (802.15.4) protocol that came out in September 2012 for Atmel's RF product line.

We ported it successfully to the Arduino 1.0+ build and added some perks to the library like range testing. We're also working on integrating over-the-air upgrading into the Arduino library, taking all of the fuss out programming Arduino's wirelessly. Right now the chipset we've been testing on is the ATmega128RFA1.

We've invested the countless hours in software development to release our little Arduino-friendly board called the miniSWARM, a low cost wireless platform for home automation, robotics control and monitoring. Everything will be released as open source to the community in June 2013, as soon as we can get our project funded :-D. Please check out the link here for more details on the software and hardware http://www.indiegogo.com/projects/miniswarm-scalable-wireless-arduino-radio-module/x/2714522.
Pages: [1]