Show Posts
Pages: 1 [2] 3
16  Forum 2005-2010 (read only) / Development / Re: optimising for size on: August 28, 2006, 05:03:27 am
could someone post coomands for compiling linking and building!
Code:
tools/avr/bin/avr-gcc -c -g -Os -IC:\Programiranje\arduino-0004\lib\targets\arduino -w -mmcu=atmega8 -DF_CPU=16000000L C:\Programiranje\arduino-0004\lib\targets\arduino\buffer.c -oC:\DOCUME~1\Janez\LOCALS~1\Temp\build48482.tmp\buffer.c.o

I did find only those! Why I need them? Someone would ask! I need them for buildng my own IDE for Arduino. Work is allmost done i just need compiling commands becouse i don't want to use make! Thanks for help!
17  Forum 2005-2010 (read only) / Français / Re: [APL] Un récepteur Infrarouge SIRCS on: August 09, 2006, 05:18:14 pm
Hello, how to make na rc5 protocol decoder i have specs but your code is hard to produce can you help?Sorry for English, but I dont't understand French! http://www.xs4all.nl/~sbp/knowledge/ir/rc5.htm << specs
18  Forum 2005-2010 (read only) / Troubleshooting / Re: ISP  Documentation on: August 28, 2006, 12:50:31 pm
for serial upload you could use megaload.NET. And for setting you should look into C:\Documents and Settings\USERNAME\Application Data\Arduino! for parallel port you could use ISPPROG!
19  Forum 2005-2010 (read only) / Troubleshooting / Re: Can't program firmware on: May 24, 2006, 09:59:09 am
 smiley happy programming
20  Forum 2005-2010 (read only) / Troubleshooting / Re: Can't program firmware on: May 23, 2006, 10:59:42 am
try http://www.amwaw.edu.pl/~adybkows/elka/ispprog.html download the program, under options select uisp and thats it. Select hex and try to upload file, if it does click reset and wait! if nothig heppens with LED try changing cksel bits 3to0 to 0100 this is 8Ghz if it works thats it, if stil not working try changing capaticors near crystal. Write what error it gives
21  Forum 2005-2010 (read only) / Troubleshooting / Re: Can't program firmware on: March 26, 2006, 10:54:58 am
If for someone still doesn't work check http://www.avrfreaks.net/index.php?name=PNphpBB2&file=viewtopic&t=36591&highlight=programmer this page! All in detail information for common problems with PPP or DAPA!
22  Forum 2005-2010 (read only) / Troubleshooting / Re: Can't program firmware on: March 16, 2006, 08:04:48 am
Yes, it did work! Thanks for help!
23  Forum 2005-2010 (read only) / Troubleshooting / Re: Can't program firmware on: March 14, 2006, 10:14:42 am
http://www.melabs.com/downloads/XP_stop_polling.reg here is link to reg file which disables port polling. And if some day this link will not work again there is code:
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Parport\Parameters]
"DisableWarmPoll"=dword:00000001

this fix is also included in avrdude package! And about that config file can you send it to janez(at)tegleda(dot)com
24  Forum 2005-2010 (read only) / Troubleshooting / Re: Can't program firmware on: March 14, 2006, 09:29:31 am
Thanks for help! I'am gouing to try it when i get home! smiley
25  Forum 2005-2010 (read only) / Troubleshooting / Re: Can't program firmware on: March 12, 2006, 03:26:19 pm
Anyone?
26  Forum 2005-2010 (read only) / Troubleshooting / Can't program firmware on: March 11, 2006, 08:50:09 pm
Hello!

I have very big problem, I can't programm boot code using uisp! I have tried many things, changed seetings in BIOS, installed giveio, tryed diffrent sch for ISP like http://www.ncfreak.com/cecilia/elec/usbavrw/sch/dapa.pdf
and http://arduino.berlios.de/index.php/Main/ParallelProgrammer
tryed in linux nothing works. For programming i use this batch

cd ..
tools\avr\bin\uisp -dpart=ATmega8 -dprog=dapa -dlpt=0x378 --download of=log.txt
tools\avr\bin\uisp -dpart=ATmega8 -dprog=dapa -dlpt=0x378 --wr_lock=0xFF
tools\avr\bin\uisp -dpart=ATmega8 -dprog=dapa -dlpt=0x378 --wr_fuse_l=0xdf --wr_fuse_h=0xca
pause
tools\avr\bin\uisp -dpart=ATmega8 -dprog=dapa -dlpt=0x378 --erase
pause
tools\avr\bin\uisp -dpart=ATmega8 -dprog=dapa -dlpt=0x378 --upload if=bootloader\ATMegaBOOT.hex
pause
tools\avr\bin\uisp -dpart=ATmega8 -dprog=dapa -dlpt=0x378 --verify if=bootloader\ATMegaBOOT.hex
pause
tools\avr\bin\uisp -dpart=ATmega8 -dprog=dapa -dlpt=0x378 --wr_lock=0xCF
cd bootloader
pause

and this is what I get out

20:18:03,10 - XPize

E:\arduino\arduino-0003\bootloade

E:\arduino\arduino-0003|> tools\a
x378 --download of=log.txt
Atmel AVR ATmega8 is found.
Downloading: flash

S0080000666C617368E9
S1130000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC
S1130010FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEC
S1130020FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDC
S1130030FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC
S1130040FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBC
..... and so on
S5030200FA
S9030000FC

E:\arduino\arduino-0003|> tools\a
x378 --wr_lock=0xFF
Atmel AVR ATmega8 is found.
Writing lock bits ...
Reinitializing device
Atmel AVR ATmega8 is found.

Lock Bits set to 0xff

E:\arduino\arduino-0003|> tools\a
x378 --wr_fuse_l=0xdf --wr_fuse_h=
Atmel AVR ATmega8 is found.

Fuse Low Byte set to 0xdf

Fuse High Byte set to 0xca

E:\arduino\arduino-0003|> pause


E:\arduino\arduino-0003|> tools\avr\bin\uisp -dpart=ATmega8 -dprog=dapa -dlpt=0
x378 --erase
Atmel AVR ATmega8 is found.
Erasing device ...
Reinitializing device
Atmel AVR ATmega8 is found.

E:\arduino\arduino-0003|> tools\
x378 --upload if=bootloader\ATMeg
Atmel AVR ATmega8 is found.
Uploading: flash

E:\arduino\arduino-0003|> pause


flash error at address 0x1ece: file=0x10, mem=0xff
flash error at address 0x1ecf: file=0x32, mem=0xff
flash error at address 0x1ed0: file=0x58, mem=0xff
flash error at address 0x1ed1: file=0xf0, mem=0xff
... and so on

E:\arduino\arduino-0003|> pause


E:\arduino\arduino-0003|> tools\avr\bin\uisp -dpart=ATmega8 -dprog=dapa -dlpt=0
x378 --wr_lock=0xCF
Atmel AVR ATmega8 is found.
Writing lock bits ...
Reinitializing device
Atmel AVR ATmega8 is found.
Warning: lock bits write=0xCF read=0xFF

Lock Bits set to 0xcf

E:\arduino\arduino-0003|> cd bootloader

E:\arduino\arduino-0003\bootloader|> pause


I'am using Serial version of Arduino board  v2.0s. I have discoverd that when i connect isp header on lpt port but no power to the board the power led slightly lights and led betwen output 13 and gnd is blinking while programming!

PLEASE HELP!
27  Forum 2005-2010 (read only) / Troubleshooting / Re: Problem with board on: May 02, 2006, 03:00:55 pm
 :-X i figured out the resonator capaticors were 270pF(271) and not 27p(27)!
28  Forum 2005-2010 (read only) / Troubleshooting / Re: Problem with board on: April 30, 2006, 07:28:55 am
I'am using single sided pcb board! i've build simple version of schematics on protoboard. The problem is the same chip is burned! here are programming settings http://www.esnips.com/doc/799936a0-fd02-4302-b778-1de2c0338f61/SPI-programing-Atmel.jpg
29  Forum 2005-2010 (read only) / Troubleshooting / Problem with board on: April 29, 2006, 11:59:38 am
Hello I have realy anoying problem with my board! I've made some boards but this gives me real hedache when i try to program it burns the chip(first think).  About some time spendig on chips i realized there mus be something else i tryied first to upload firmware(boot code) the setting fusese it works but when i enter fuses it hangs only thing i get from chip is ffffff not the hex value of chip! I've speculated that there is some problem with crystal but voltage is ok (1,9v). Any sugestions?
30  Forum 2005-2010 (read only) / Frequently-Asked Questions / Arduino bluetooth, hardware design? on: June 21, 2006, 03:38:40 pm
At hardware section we read
Quote
Bluetooth - This is the latest version that eliminates the need for cables going to the microcontroller board. It can be programmed and communicate up to 10 metres away from a computer. It can also be used from a mobile phone. (The design for this board will be downloadable after we debug it smiley
There is a glich, recently  I recived email regarding bluetooth arduino, but where is schematics? No offence, but i would reaLLY like to see that schematics and details of board! Do we need new firmaware? Do we need new IDE?
Pages: 1 [2] 3