Show Posts
Pages: [1] 2 3 ... 14
1  Using Arduino / Programming Questions / Re: control smartphone with arduino on: January 14, 2014, 06:23:43 am
Hello Nick

Thanks by your answer.
So, can you suggest me a specific non troubleshooting 'bluetooth module' ?

Thanks on advance
Pedro Ferre
2  Using Arduino / Installation & Troubleshooting / Re: Problem in Arduino - Android connection on: January 14, 2014, 03:35:55 am
Hello

Perhaps isn't the right place to post this... but... I don't know where to put it...

Few months ago, I've bought the following bluetooth module - 'JY-MCU'
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=230735842973&ssPageName=ADME:L:OU:ES:3160

I usually use it to stablish communication between Arduino and my Laptop, without any problem.

It happens that now I'm trying to develop an application to communicate between my Android phone (Samsung Galaxy Mini GT-S5570 with Android 2.3.6) and Arduino.
The Android phone don't detect the bluetooth module...

I've tried to pair an 'AEG Glamour'-'bluetooth module', detects the module, ask the code, but it seems that also doesn't pair, because the red light don't stop blinking...

With my Android phone I can pair with my laptop, iPod and even with my Bose Mini SoundLink, but not with Bluetooth Module Slave.

So perhaps I'm missing some configuration on my Bluetooth Module Slave or some protocol... I really don't know...

Please let me know
Thanks on advance
Best regards
Pedro Ferrer
3  Using Arduino / Project Guidance / Re: [RESOLVED] Controlling the Arduino with an Android over Bluetooth? on: January 14, 2014, 03:20:33 am
Hello

Perhaps isn't the right place to post this... but... I don't know where to put it...

Few months ago, I've bought the following bluetooth module - 'JY-MCU'
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=230735842973&ssPageName=ADME:L:OU:ES:3160

I usually use it to stablish communication between Arduino and my Laptop, without any problem.

It happens that now I'm trying to develop an application to communicate between my Android phone (Samsung Galaxy Mini GT-S5570 with Android 2.3.6) and Arduino.
The Android phone don't detect the bluetooth module...

I've tried to pair an 'AEG Glamour'-'bluetooth module', detects the module, ask the code, but it seems that also doesn't pair, because the red light don't stop blinking...

With my Android phone I can pair with my laptop, iPod and even with my Bose Mini SoundLink, but not with Bluetooth Module Slave.

So perhaps I'm missing some configuration on my Bluetooth Module Slave or some protocol... I really don't know...

Please let me know
Thanks on advance
Best regards
Pedro Ferrer
4  Using Arduino / Programming Questions / Re: control smartphone with arduino on: January 14, 2014, 03:17:54 am
Hello

Perhaps isn't the right place to post this... but... I don't know where to put it...

Few months ago, I've bought the following bluetooth module - 'JY-MCU'
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=230735842973&ssPageName=ADME:L:OU:ES:3160

I usually use it to stablish communication between Arduino and my Laptop, without any problem.

It happens that now I'm trying to develop an application to communicate between my Android phone (Samsung Galaxy Mini GT-S5570 with Android 2.3.6) and Arduino.
The Android phone don't detect the bluetooth module...

I've tried to pair an 'AEG Glamour'-'bluetooth module', detects the module, ask the code, but it seems that also doesn't pair, because the red light don't stop blinking...

With my Android phone I can pair with my laptop, iPod and even with my Bose Mini SoundLink, but not with Bluetooth Module Slave.

So perhaps I'm missing some configuration on my Bluetooth Module Slave or some protocol... I really don't know...

Please let me know
Thanks on advance
Best regards
Pedro Ferrer
5  Using Arduino / Programming Questions / Re: Using digitalRead() for checking when PWM is HIGH or LOW on: March 06, 2013, 05:02:27 am
Good morning

Arduino IDE 1.0.1

This week I've found this kind of problem...
I've build my own IO table on my LCD to show Input and Output states...
I've found that my Pin 11 and 12 (PWM ports), defined as Output, when I use 'digitalRead(pin)' to check if I apply 'x' or ' ' on LCD, the leds on my breadboard will blink! On... Off...On...Off...

It seems that exist some interrupt...

How can I avoid situation?

Thanks on advance
Pedro Ferrer
6  Using Arduino / Programming Questions / Re: warning: internal error: out of range error on: October 26, 2012, 02:15:36 pm
Solved with Arduino 1.0.1 (on Arduino IDE), after correct some things because I've updated from Arduino 0023.
But on VS2008, using Visual Micro I have the old errors
7  Using Arduino / Programming Questions / Re: warning: internal error: out of range error on: October 26, 2012, 01:58:57 pm
I've installed Arduino 1.0.1 but problem remains...
8  Using Arduino / Programming Questions / Re: warning: internal error: out of range error on: October 26, 2012, 12:58:20 pm
I'm using Arduino 23... perhaps Arduino 1.0 will fix it

What do you think?
9  Using Arduino / Programming Questions / Re: warning: internal error: out of range error on: October 26, 2012, 11:53:34 am
Did you try the "relax" option?

I don't understand how to use it...
It seems that I have to change a config file... is that?
10  Using Arduino / Programming Questions / Re: warning: internal error: out of range error on: October 26, 2012, 11:52:36 am
continue...

Quote
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\pins_arduino.c.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\WInterrupts.c.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\wiring.c.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\wiring_analog.c.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\wiring_digital.c.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\wiring_pulse.c.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\wiring_shift.c.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\CmdMessenger.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\EEPROM.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\HardwareSerial.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\LCD4Bit_mod.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\main.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\MemoryFree.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Print.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Tone.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Wire.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\WMath.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-ar rcs C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\WString.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-gcc -Os -Wl,--gc-sections -mmcu=atmega2560 -o C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Codino1.cpp.elf C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Codino1.cpp.o C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\EEPROM\EEPROM.cpp.o C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Wire\Wire.cpp.o C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Wire\utility\twi.c.o C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a -LC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp -lm
C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a(HardwareSerial.cpp.o):C:\arduino\arduinoIDE\hardware\arduino\cores\arduino/HardwareSerial.cpp:177: warning: internal error: out of range error
C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a(HardwareSerial.cpp.o)smiley-sad.rodata._ZTV14HardwareSerial+0x4): warning: internal error: out of range error
C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a(HardwareSerial.cpp.o)smiley-sad.rodata._ZTV14HardwareSerial+0x6): warning: internal error: out of range error
C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a(HardwareSerial.cpp.o)smiley-sad.rodata._ZTV14HardwareSerial+0x8): warning: internal error: out of range error
C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a(HardwareSerial.cpp.o)smiley-sad.rodata._ZTV14HardwareSerial+0xa): warning: internal error: out of range error
C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a(HardwareSerial.cpp.o)smiley-sad.rodata._ZTV14HardwareSerial+0xc): warning: internal error: out of range error
C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a(HardwareSerial.cpp.o)smiley-sad.rodata._ZTV14HardwareSerial+0xe): warning: internal error: out of range error
C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\core.a(HardwareSerial.cpp.o)smiley-sad.rodata._ZTV14HardwareSerial+0x10): warning: internal error: out of range error
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-objcopy -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Codino1.cpp.elf C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Codino1.cpp.eep
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-objcopy -O ihex -R .eeprom C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Codino1.cpp.elf C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Codino1.cpp.hex
Binary sketch size: 138728 bytes (of a 258048 byte maximum)
11  Using Arduino / Programming Questions / Re: warning: internal error: out of range error on: October 26, 2012, 11:51:56 am
My report

Quote
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-g++ -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino -IC:\arduino\arduinoIDE\libraries\EEPROM -IC:\arduino\arduinoIDE\libraries\Wire C:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Codino1.cpp -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Codino1.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-g++ -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino -IC:\arduino\arduinoIDE\libraries\EEPROM -IC:\arduino\arduinoIDE\libraries\Wire -IC:\arduino\arduinoIDE\libraries\EEPROM\utility C:\arduino\arduinoIDE\libraries\EEPROM\EEPROM.cpp -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\EEPROM\EEPROM.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-g++ -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino -IC:\arduino\arduinoIDE\libraries\EEPROM -IC:\arduino\arduinoIDE\libraries\Wire -IC:\arduino\arduinoIDE\libraries\Wire\utility C:\arduino\arduinoIDE\libraries\Wire\Wire.cpp -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Wire\Wire.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-gcc -c -g -Os -w -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino -IC:\arduino\arduinoIDE\libraries\EEPROM -IC:\arduino\arduinoIDE\libraries\Wire -IC:\arduino\arduinoIDE\libraries\Wire\utility C:\arduino\arduinoIDE\libraries\Wire\utility\twi.c -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Wire\utility\twi.c.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-gcc -c -g -Os -w -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\pins_arduino.c -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\pins_arduino.c.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-gcc -c -g -Os -w -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\WInterrupts.c -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\WInterrupts.c.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-gcc -c -g -Os -w -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\wiring.c -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\wiring.c.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-gcc -c -g -Os -w -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\wiring_analog.c -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\wiring_analog.c.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-gcc -c -g -Os -w -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\wiring_digital.c -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\wiring_digital.c.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-gcc -c -g -Os -w -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\wiring_pulse.c -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\wiring_pulse.c.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-gcc -c -g -Os -w -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\wiring_shift.c -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\wiring_shift.c.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-g++ -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\CmdMessenger.cpp -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\CmdMessenger.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-g++ -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\EEPROM.cpp -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\EEPROM.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-g++ -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\HardwareSerial.cpp -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\HardwareSerial.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-g++ -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\LCD4Bit_mod.cpp -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\LCD4Bit_mod.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-g++ -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\main.cpp -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\main.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-g++ -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\MemoryFree.cpp -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\MemoryFree.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-g++ -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\Print.cpp -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Print.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-g++ -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\Tone.cpp -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Tone.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-g++ -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\Wire.cpp -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\Wire.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-g++ -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\WMath.cpp -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\WMath.cpp.o
C:\arduino\arduinoIDE\hardware\tools\avr\bin\avr-g++ -c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=22 -IC:\arduino\arduinoIDE\hardware\arduino\cores\arduino C:\arduino\arduinoIDE\hardware\arduino\cores\arduino\WString.cpp -oC:\Users\PEDROF~1\AppData\Local\Temp\build8718295904879608709.tmp\WString.cpp.o
12  Using Arduino / Programming Questions / Re: warning: internal error: out of range error on: October 26, 2012, 11:47:38 am
Hello

I still don't get the problem...
The problem is about flash? Should be 256000 bytes, no? Why blow with about 139000 bytes?...

I don't get...

13  Using Arduino / Programming Questions / Re: warning: internal error: out of range error on: October 26, 2012, 04:28:47 am
I've found this

http://arduino.cc/forum/index.php?topic=100923.0;wap2


Quote
Apparently we need to pass a --relax flag when building for the atmega2560. When building with normal version of Arduino when the sketch goes beyond 128k, we get this error.
There is a "relax version" as they call it laying around for whomever that would like to use it.

What this mean?

Thanks on advance
14  Using Arduino / Programming Questions / Re: warning: internal error: out of range error on: October 26, 2012, 02:27:21 am
Hello

Very complex application... moonrise, sunrise, tides, seasons, ATO, dosing pumps... etc etc...

My binary sketch has about 139000 bytes (of ~258000 maximum)
I never thought that my application were limited by 128k flash...
I also have several char saved on flash to save RAM...

15  Using Arduino / Programming Questions / Re: warning: internal error: out of range error on: October 25, 2012, 01:59:55 am
Hello

Some of them are not used yet (18000 lines)... because with 8 bits I have lack of precision on math. So, for now I quit, waiting for 32 bit AVR.
I have a lot of scientific math inside program and there I can't change anything.

So,

1. Connect 2 arduinos to each other?
2. The new Arduino Due 32bits will let me finish my project?

Pages: [1] 2 3 ... 14