Show Posts
Pages: 1 [2] 3 4 ... 40
16  General Category / General Discussion / Re: Arduino Packaging Strategy is Wasting Paper Products on: March 19, 2013, 12:46:57 am
Spock, would you think it's just logical to receive answers like this when you don't use your medication?
 smiley-grin

I have learn that important lesson quite while ago, sometimes I still forget it tho;
"The world you get is the world you give away"

That was the closest match in english I could find.

As long you keep your anger level high, you will gain nothing.

Cheers,
Kari

PS. I don't see your inner "Spock", help us little...
17  General Category / General Discussion / Re: Arduino Packaging Strategy is Wasting Paper Products on: March 18, 2013, 12:14:07 am
You mean, if they would use the ESD bag also, the package would be just perfect?

C'moon, leave the guy alone, he has a point after all.

But all this should be scaled on the real world sized packaking with much too much plastic.

If you install, let's say new IBM PC, you have 3-4 plastic bags for few little parts that you probably won't even use, every piece of "manuals" are in their
own bag, and what are you going to do with them once you have them? Yeah, right to the trash bin.

Plastic is the real problem. But not with the electrical components, with little bag of silicon.

Cheers,
Kari
18  General Category / General Discussion / Re: Arduino Packaging Strategy is Wasting Paper Products on: March 11, 2013, 01:55:13 pm
Maybe you have on idea, but how I see this board, it is more likely for trying to develope the hardware (electronic) and the software (program, sketch)?
And you can correct me here.

But, you really should think about the way you are selling your idea, you are very aggressive.
Nobody's trying to shoot down your great idea.

Cheers,
Kari
19  General Category / General Discussion / Re: Arduino Packaging Strategy is Wasting Paper Products on: March 11, 2013, 09:30:25 am
I can see your point very well, but why are you crying here and point to administrators?
Why not to send the message directly to manufacturer?

Package seems to be... more than enough to cover the product from factory to end user. I have received
poorly wrapped electronics that still works after all... lucky? So what, chinese products are cheap, so are
the actions with sending them.

What can we do here to have original Arduinos send like chinese cheapos?
 smiley-wink

Your attitude is, for some reason, quite hostile in this case, calm down!
 smiley

Cheers,
Kari
20  General Category / General Discussion / Re: Arduino Packaging Strategy is Wasting Paper Products on: March 11, 2013, 06:31:31 am
Quote
If you have a constructive suggestion then send it to them, I'm sure they are very environmentally aware as a company.[/color]

If they are anything like the administration of this forum, I doubt they will care about my message.  smiley-roll

You think that administrators here are owners of the Arduino products, and they should answer to you?
 smiley-slim

Cheers,
Kari
21  General Category / General Discussion / Re: A new Arduino Q&A site on: February 11, 2013, 03:55:05 am
I don't understand the purpose of that Q & A site, what is it for? Just a hobby for someone?

Cheers,
Kari
22  Topics / Education and Teaching / Re: Our School Project - Security System using RFID + Biometric Fingerprint Scanner on: February 10, 2013, 03:16:37 pm

...using #-button, and paste your  code in it...


Try again...

Cheers,
Kari
23  Topics / Education and Teaching / Re: Our School Project - Security System using RFID + Biometric Fingerprint Scanner on: February 10, 2013, 03:41:31 am
There is something wrong with your rar. You should attack your code like others do it, using #-button, and paste your  code in it.

Cheers,
kari
24  Community / Gigs and Collaborations / Re: Please help me merge my codes (will PAY) on: February 10, 2013, 02:10:28 am
Why don't just put your code here and someone could take a look and help you?

What is wrong with you, you just copied your first post? Can you copy your code as well?

Cheers,
Kari
25  Community / Gigs and Collaborations / Re: Please help me merge my codes on: February 05, 2013, 01:15:01 am
Don't you think that something is missing?

Cheers,
Kari
26  General Category / General Discussion / Re: Frequency correcting, arduino > other ? on: February 04, 2013, 02:56:47 am
Quick and dirty idea...

Could it possible if I put faster chrystal, and slow it down with arduino by shorting it periodically?
Microcontroller in the controller board is Atmel's AT89S51.

Making the clock faster by controlling it with an Arduino sounds too hard task, slowing down
external clock...? How about that?

Cheers,
KAri
27  General Category / General Discussion / Frequency correcting, arduino > other ? on: February 04, 2013, 02:34:47 am
Hi!

Long time no english, hence the stupid topic!
 smiley

I have standalone stepper controller which has 3.579545MHz chrystal on board.
Testing it for quite a while, it came out to be too slow, not much, but error is
significant.  I need  1.002552796 times faster clock, equals to 3.58868285Mhz.
And that is not 100% precise, just to help to keep on track for 4-8 hours.

I don't need precise timing more than every 15-30 seconds, that correction will
do just fine.

Reference time would come from gps, so temperature correction is not needed.

This is telescope mount that needs to be corrected, cheap and usefull way, any
clever ideas that can be taken to design table, would help a lot.

Thanks and cheers,
Kari
28  Community / Exhibition / Gallery / Re: Arduino + Kinect = Dancing House on: January 27, 2013, 08:01:40 am
Where is the Arduino?
 smiley-neutral

Cheers,
Kari
29  International / Scandinavia / Re: Uudelle foorumille suomalaisaihe on: January 21, 2013, 05:52:55 am
Terve MikkoR!

Arduino foorumilla tulet huomaamaan että koodi on kaikki kaikessa. Kun kysyt, mikä mättää, tai mitä pitäisi korjata, kannattaa laittaa sen hetkinen koodi tarjolle. Tuolla on muutamia kavereita jotka eivät vaivaudu enää vastaamaan/pyytämään koodia, ja juuri heillä on todennäköisimmin sinulle ratkaisu pulmaan.

Ja tarkoitan nimenomaan englanninkielistä osiota. Ei kannata vaivautua tänne suomenkielellä, sen sijaan http://www.ruuvipenkki.fi on hyvä reitti meikäläisittäin.
 smiley

Kari
30  Topics / Home Automation and Networked Objects / Re: cannot combine the ethernet shield and RF24L01. on: December 20, 2012, 04:45:01 am
Why are you asking that again?

Cheers,
Kari
Pages: 1 [2] 3 4 ... 40