Show Posts
Pages: [1] 2 3
1  Using Arduino / Displays / Re: Board files for LCD dogs102 on: April 27, 2012, 10:05:06 am
Schematics were published with Libraries at Oliver's site.

I can't publish board layouts since they don't belong to me personally and they are not designed for DIY home making.
I have few blank board still laying around if someone wants them, but I don't have any assembled devices.
2  Using Arduino / Sensors / Re: new thermocouple interface: MAX31855 on: August 14, 2011, 07:33:31 pm
Thanks guys!

I will try to add my examples also.
3  Using Arduino / Sensors / Re: new thermocouple interface: MAX31855 on: August 08, 2011, 07:51:11 am
MAX31855 can use MAX6675 routines without any changes to read TC temperature.
BTW MAX6675 routines I found can't display negative temperatures correctly, so I corrected this.
 
In addition MA31855 can read:
- CJC temperature (internal to the chip)
- Open Wire Fault
- Short to GND Fault
- Short to VCC Fault

I also like that they made multiple versions for different TC types - one I was using is for type J TC wire.
I will add some examples later on.
4  Using Arduino / Sensors / Re: new thermocouple interface: MAX31855 on: August 07, 2011, 08:36:58 pm
I posted MAX 31855 libraries:
http://github.com/ControlConnection/MAX31855
5  Using Arduino / Sensors / Re: new thermocouple interface: MAX31855 on: August 06, 2011, 06:32:20 pm
Not exact replacement: MAX31855 does not work @ 5V, only use with 3.3V  smiley-sad
6  Community / Exhibition / Gallery / Re: Graphic LCD Shield with DOGS102 display, keypad and Ethernet/SD compatiblilty on: July 30, 2011, 02:17:41 pm
This shield now can be used with Mega2560 and upcoming DOGM library release (1.11)
Software SPI used to control display since Mega board SPI pins don't match smaller boards this dispaly designed for.

let me know if you have ant questions.
7  Using Arduino / Displays / Re: Graphic LCD shield with EA DOGS102W display on: July 30, 2011, 02:13:01 pm
This shield now supports Mega2560 with software SPI and next library release 1.11
It is expected to work with any other Mega based boards

8  Using Arduino / Displays / Re: Graphic LCD shield with EA DOGS102W display on: May 21, 2011, 08:21:29 am
Last 3 displays are now on-sale (direct or via eBAy).
I still have blank PCBs available, but at this point we are not planning to build any more in advance.
9  Using Arduino / Displays / Re: Graphic LCD shield with EA DOGS102W display on: March 24, 2011, 07:36:22 pm
Arduino Mega has SPI pins in different location and as result LCD shield can't be used as-is
But you can remove SCK, MOSI header pins (11 and 13) and use wires to move them to Mega SPI pins
PM me if you need more details

Stock Backlight color is amber. White backlight can be used but it is more expensive and we don't use it.

To change backlight brightness you can move bklt_src jumper and enable PWM on pin D6.

We still have few Standard and Ethernet/SD compatable shields if someone needs them.
10  Community / Exhibition / Gallery / Re: Graphic LCD Shield with DOGS102 display, keypad and Ethernet/SD compatiblilty on: March 19, 2011, 07:42:04 pm
To guys who are using libraries with this LCD and getting compiler error:

you must define DOGS102 LCD in dogm128.h file as shown below

Code:
//#define DOGM128_HW /* uncomment for the DOGM128 display */
#define DOGS102_HW /* uncomment for the DOGS102 display */
//#define DOGM132_HW /* uncomment for the DOGM132 display */
11  Community / Exhibition / Gallery / Re: Graphic LCD Shield with DOGS102 display, keypad and Ethernet/SD compatiblilty on: March 06, 2011, 03:38:18 pm
Yes, blank PCBs available, check your PM
12  Community / Exhibition / Gallery / Graphic LCD Shield with DOGS102 display, keypad and Ethernet/SD compatiblilty on: February 20, 2011, 06:19:09 pm
This topic begins here: http://arduino.cc/forum/index.php/topic,8858.0.html

Now we have modified shield that is compatible with standard Ethernet/SD Shield

Since many people were looking for to use this shield with other SPI shields we decided to modify it
- Used tall pin headers to provide clearance with tall Ethernet connector
- Moved CS pin from D10 to D8 to allow Ethernet shiled use D10
- Moved S1 signal from D4 to D7 to allow SD card use

This shield available over eBay and directly
We also still have original shield if you don't need Ethernet/SPI shield capabilities

See pictures below
 
13  Using Arduino / Displays / Re: Graphic LCD shield with EA DOGS102W display on: February 17, 2011, 08:50:59 pm
Ethernet/SD compatible shields are available now - contact us if you need one.
14  Using Arduino / Displays / Re: Graphic LCD shield with EA DOGS102W display on: February 13, 2011, 06:44:13 pm
Library ver 1.09 released recently.
It implemented mandatory LCD type selection to prevent incorrect default display selection.

We should have Ethernet capable shields later this week when LCD parts arrive.

If you don't need Ethernet compatibility, our Standard Shileds are available now from eBay or directly form us.
PM or email me.
15  Using Arduino / Displays / Re: Graphic LCD shield with EA DOGS102W display on: February 02, 2011, 06:30:56 pm
To people who contacted me about Ethernet/SD compatible shields:
We are still waiting for LCD backlights to come, we have everything else includng LCDs themself

So please be patient and we will be back smiley

If you don't need Ethernet shield compatability, when standard LCDs are available today.

I also recomend you to check a Chess game written by library developer Oliver Kraus:
http://arduino.cc/forum/index.php/topic,50632.0.html


Pages: [1] 2 3