Show Posts
Pages: [1] 2 3 4
1  Using Arduino / Networking, Protocols, and Devices / Re: RF24 Library Multi Node Communication Problem on: March 26, 2014, 03:23:43 am
Hi. Have you solved this? I'm desperate in need of solving a situation that I ping 3-4 nodes from one main node and find the distance between the nodes.  smiley-sad-blue

Please reply!
2  International / Scandinavia / CNC Arduino + EasyDriver on: January 08, 2014, 04:51:01 am
Hei. Har noen her laget en CNC med easydriver?
Har kjøpt inn easydriver + motorer og skal sette dette sammen nå. Men jeg trenger å få arduinoprogrammet. og ett program som kjører alt.
Noen med erfaring om dette her?
3  Using Arduino / Project Guidance / Re: CNC Arduino + EasyDriver on: January 08, 2014, 04:16:19 am
PaulS, I came with a question. And wow, you answered it...!
Money?
Ok...

GRBL, I have lokked at it. It's a hex file, and then you can't change it. So then I can't add stuff like toolchanger.
Since I'm not familiar how CNC code works, I came with a question how people do it, and I wrote I liked Mach 3 CNC Control Software. If there is other ones that is easier, what is that software?

So PaulS, instead of think you are a master, then use your knowledge to answer instead of act like a idiot!
4  Using Arduino / Project Guidance / CNC Arduino + EasyDriver on: January 07, 2014, 12:32:35 am
Hi all smiley
I know there is a bounch of codes out there, but it seams I can't find them....
I need a CNC code for arduino with easydriver. And what is the prefered soft? I like Mach 3 CNC Control Software.

Please help me guys smiley
5  Using Arduino / Project Guidance / Re: CNC Arduino Uno + EasyDriver v4.3 PORTUGAL on: January 07, 2014, 12:28:00 am
Hi guys. I want to make a pcb CNC. NowI have bought easydriver and motors, and the spindle. Now I need the arduino code?
Could someone please help me???
6  Using Arduino / Displays / Re: touch screen on: March 16, 2013, 07:10:49 pm
Mike  smiley
Thank you a lot smiley This was really helpful!
So now i know I can't use arduino.

Again, thanks for your help so far smiley
7  Using Arduino / Displays / Re: touch screen on: March 15, 2013, 04:57:06 pm
Hi Mike.
It´s just that I´m interested to make stuff. I´m also studying electronics, so I have a god understanding in electronics. And this is something we´re not learning at univeristy.
So thats why I ask here...
Whats my thougt about this is, to have a LCD TFT screen connected to arduino board. Schematics are stored in a SD-card.

It shouldn´t be so hard to do this?
8  Using Arduino / Displays / Re: touch screen on: March 15, 2013, 10:16:34 am
I know I could buy finished product, but isn´t this what arduino is about. To make your own projects, make your own small things...
And yes, I know arduino don´t have any memory to run images...
But that is why we have memory card...
So anyone have an idea how and where to buy touch screens? 8-11"?

Best,
Andy
9  Using Arduino / Displays / touch screen on: March 14, 2013, 06:20:59 pm
Hi guys.
I'm thinking of adding a 10" lcd touch screen to my project.
How is it working? To load images and so on...
I've had a look at atmel site and there was alot of touch controllers.
And a lot more questions.........

Basickly, help me! Where can I buy products like lcd, touch controllers and so on.
Cause, it would be funny to include a big screen to a project smiley
10  Topics / Device Hacking / Re: iPhone Camera Module? on: November 15, 2012, 07:46:55 am
Hi guys.
Have anyone of you got thid work?

I think of mount a camera on a card and send wirelessly and all from arduino

Best,
Andy
11  Using Arduino / Programming Questions / Re: Excel on: October 17, 2012, 06:54:19 am
Hi Jimmy60
The counter is not what I´m going to use. Later I insert a Real Time Clock Module.
So instead of counter, I´ll use time.
12  Using Arduino / Programming Questions / Re: Excel on: October 10, 2012, 03:26:52 pm
Hi guys smiley
I mean when i take the SD card out from Arduino, deploy it to my computer, and then open it in Excel.
It´s saved as datalog.csv.
I tried cupple of things. Serial.print(","); Serial.print(´,´); String(id +" , "+ temp);.
Still same prob. When I open datalog.csv, I get the value like:
1, 22.5
2, 22.9
3, 22.1
4, 22.3...

But when I imported csv file, I got the data in 2 different columbs.
It´s really not a big issue, but it would be nice to get everything workout as I want to smiley

But again guys, thanks for your help so far smiley

-Andy
13  Using Arduino / Programming Questions / Re: Excel on: October 10, 2012, 07:11:15 am
Hi.
Thanks for your reply.
Here is the code i have to store to memory:

      File dataFile = SD.open("datalog.csv", FILE_WRITE);
     
      if(dataFile)
      {
        dataFile.print(id);
        dataFile.print(',');
        dataFile.println(sensor1);
        dataFile.close();
       
        // print to the serial port too:
        Serial.print(id);
        Serial.print("\t");
        Serial.print(sensor1);
        Serial.print("\t");
        Serial.println(gjennomSnitt);
       
        //Increment ID number
        id++;
      }

When i imported the data, I got what I wanted.
But is there a way to solve this without importing??

-Andy
14  Using Arduino / Programming Questions / Excel on: October 10, 2012, 05:04:51 am
Hi all.
I made a temperature datalogging with SD card.
For now, I just have logged number of logging and temperature.
id.......Temperature
1.......22.31
2.......22.90
3.......23.47

Now I want it to import data to excel.
But as I programmed, id and temperature goes into one colone.
Is there a way to get them into 2 colones?

-Andy
15  Using Arduino / Programming Questions / Re: SD card on: October 08, 2012, 02:47:41 pm
PaulS smiley
Thanks! Now it works smiley-grin

-Andy
Pages: [1] 2 3 4