Zapowiada się na to że jedyni ;P
Nie za wielu interesuje się tą platformą, w Polsce z niewiadomych przyczyn rządzi bascom ;P

Ktoś z Polski bywa na tym forum ? 

Look to :

http://www.arcfn.com/2009/08/multi-protocol-infrared-remote-library.html

In comments you will find library for Panasonic models

and

http://sheepdogguides.com/arduino/ar3ne1ir.htm

It will help. On second link you have some instruction about interpenetration of incoming signals (protiop : don't delete Serial.print in loop ... without them some strange things happens)

Use 10uF cap between GND and RESET

So IDE settings are bad ?  I don't used external software to set fuse... but today I might try to use it. I fount settings :

lockbit65 set to 10
F8 fusebit set to RS - 1024 words  Q- 0

I'm using IDE.
To update bootolader I need working ISP so I must visit my friend  with one
After that I try to use UNO as ISP to burnt bootloader on atmega8 based circuit and leave note.

Ok I tried to use arduino as ISP (using 10 uF cap to disable autoreset ). So far I have one problem - bootloader is burn properly, blink sketch is burn properly but when I try to upload new sketch something happens and second arduino is bricked till next bootloader burning... and same still.
Maybe I need to burn new version of optiboot on ISP-arduino ? I bought it year ago... maybe little update will help ?

Tried this but there is small problem - http://arduino.cc/en/Tutorial/ArduinoISP

NOTE: Currently, you cannot use an Arduino Uno as an ISP programmer because the optiboot bootloader does not support this sketch. A revision for this is in progress.

@Grumpy_Mike

I tried to use my UNO as programmer...  but optiboot doesn't support ISP

Ok I See difference
So to burn bootlader I need stk500 or for  Ubasp (for example)

Can I use  something like this http://translate.googleusercontent.com/translate_c?act=url&hl=pl&ie=UTF8&prev=_t&rurl=translate.google.pl&sl=pl&tl=en&u=http://allegro.pl/konwerter-ft232-usb-rs232-ttl-interfejs-ft232rl-mi-i1813924104.html&usg=ALkJrhh29pOuBx5lwONzJnWNtlRT_inoXA (sorry for translation...) to burn bootloader and upload sketches to arduino compatible boards ?

Still same....
Bootloader is burned properly , first upload ok, second fail.
Maybe I try avoid bootloader using hex files ?

Or simply I can't use this arduino as ISP.... http://arduino.cc/en/Tutorial/ArduinoISP "Currently, you cannot use an Arduino Uno as an ISP programmer because the optiboot bootloader does not support this sketch. A revision for this is in progress"

Hmm...nope...
I only use slave reset from ISP-arduino (lead from 10-th pin to first leg of IC )

Burn bootloader dump :
http://dl.dropbox.com/u/35963789/Bootloader.txt

First blink-scheme uploaded without problems... second (on 12-th pin) faill hard...

Data from uploadnig blink sketch without reset button tricks
http://dl.dropbox.com/u/35963789/blink.rtf

I use settings from arduino 0022 software. I did not change anything in bootloader settings

Brian W.Evans
Arduino programming notebook- find it and download. It is free


Moderator Edit: Name corrected.