Show Posts
Pages: [1]
1  Forum 2005-2010 (read only) / Troubleshooting / Re: Sketchs have never imported to my UNO on: January 23, 2011, 11:15:13 pm
When I hit the upload icon while holding shift this is what I see in the text box at the bottom.   Binary sketch size: 1018 bytes (of a 32256 byte maximum)
/Volumes/Arduino 1/Arduino.app/Contents/Resources/Java/hardware/tools/avr/bin/avrdude -C/Volumes/Arduino 1/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf -v -v -v -v -patmega328p -cstk500v1 -P/dev/cu.usbmodem0000103D1 -b115200 -D -Uflash:w:/tmp/build2547085465394088275.tmp/Blink.cpp.hex:i

avrdude: Version 5.4-arduino, compiled on Oct  9 2007 at 11:20:31
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

         System wide configuration file is "/Volumes/Arduino 1/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf"
         User configuration file is "/Users/justintillson/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port            : /dev/cu.usbmodem0000103D1
         Using Programmer      : stk500v1
         Overriding Baud Rate  : 115200
avrdude: Send: 0 [30]   [20]
avrdude: Send: 0 [30]   [20]
avrdude: Send: 0 [30]   [20]
avrdude: Recv: . [86]
avrdude: stk500_getsync(): not in sync: resp=0x86
avrdude: Send: Q [51]   [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
I The tx and Rx lights flicker for just a few seconds and the pre installed plink program runs again.
2  Forum 2005-2010 (read only) / Troubleshooting / Sketchs have never imported to my UNO on: January 23, 2011, 06:40:42 pm
I just bought an UNO and am having a hard time getting sketchs to upload.  I always get a message that says user confiuration does not exist.  Maybe i did not install the driver properly.  I am running on OSx.  Please help.  I want to get started using my arduino and have come to a complete stop
Pages: [1]