Show Posts
Pages: [1] 2 3 ... 21
1  Using Arduino / Networking, Protocols, and Devices / Re: AVCOM TEK, LLC simp-lan v1.4 info on: August 06, 2013, 02:58:15 pm
Thanks, I found the pinout on one of the viseek links and sent a message to the parent company to see if there is a way to get the software. The parallax link was interesting because the poster with the link was me  smiley-razz Thanks for your help, I'll let you know what I find or maybe I can reverse engineer it now that I know where to connect.
2  Using Arduino / Networking, Protocols, and Devices / Re: AVCOM TEK, LLC simp-lan v1.4 info on: August 06, 2013, 12:35:24 pm
Here are a couple images
3  Using Arduino / Networking, Protocols, and Devices / AVCOM TEK, LLC simp-lan v1.4 info on: August 05, 2013, 06:32:34 pm
I have a small board marked simp-lan v1.4 that has an ethernet jack on one end and a row of pins on the other. There are 6 in a row then three cut off and then one more. The pins are marked VSS, P0, P2, P4, P6, P8, P10, P12, P14, VDD. There is one chip on the board, a Freescale MC9S12NE64VTU.  I wonder if anyone here knows where I can get the manual or the pinout for this as I now have a project it would work in.
Thanks for any info you can supply, Stephen
4  Using Arduino / Programming Questions / Re: Switch/case help on: June 05, 2013, 08:24:34 pm
Quote
I'm not sure about the portability/global legality, but
Code:
 switch (x) {
    case 12 ... 36:
      // do something
    break;
(note the spaces)
Thanks, that seems to work. At least it compiles.
5  Using Arduino / Programming Questions / Switch/case help on: June 05, 2013, 04:06:17 pm
Is there a way to check for a range of values in a case statement? Say I want one output for values from 12 to 36 is there a way or should I be using If/then? Thanks.
6  Forum 2005-2010 (read only) / Troubleshooting / Re: Strange problem with arduino environment on: December 11, 2008, 11:18:02 pm
All I could make out was a really blurry screen. What have you tried? Have you removed the existing version before reloading the previous and did it work before you installed the version that isn't working?
7  Forum 2005-2010 (read only) / Troubleshooting / Re: Starting- Problem on: December 01, 2008, 09:52:08 pm
Several things to check. Make sure you have the correct com port selected and the correct device. make sure you have the most current drivers for the USB and your power is comming from the expected source. If all this is good then after the sketch compiles press the reset button to reset the mini, this sometimes helps when the autoreset does not work as expected assuming the mini has autoreset.
8  Forum 2005-2010 (read only) / Troubleshooting / Re: Wont upload to board (Arduino Duemilanove) on: December 07, 2008, 09:13:32 pm
 
Quote
oh. everything works just fine now.
It would help others if you were to tell us what you did to get it working (if you know, sometimes it's just 'magic')
9  Forum 2005-2010 (read only) / Troubleshooting / Re: arduino 12 compiled sketches keep resetting on: September 26, 2008, 11:17:59 pm
When you compile the program what size does it report? Might be a clue.
10  Forum 2005-2010 (read only) / Troubleshooting / Re: URGENT !!! PLS HELP can't upload on: September 06, 2008, 10:32:49 pm
I'm getting the same symptoms although slightly different error codes. Really annoying.
11  Forum 2005-2010 (read only) / Interfacing / Re: Arduino and 1-wire on: June 19, 2008, 08:10:26 pm
What happens if you run them with power? and do you have the pullup resistor in your circuit?
12  Forum 2005-2010 (read only) / Interfacing / Re: Arduino and 1-wire on: May 23, 2008, 11:21:13 pm
More info: I've gotten the library to work, I had two problems. First I copied the sample.c file into the directory and I think that was confusing Arduino somehow and there was an extra semicolon in the code ( :-[ ..who put that there?..) I got rid of the fluff and it compiled OK and works. Thanks all for the help and support, I can use all I can get at this stage.
13  Forum 2005-2010 (read only) / Interfacing / Re: Arduino and 1-wire on: May 22, 2008, 10:22:32 pm
OK, told you I was new to all of this.  :o I just noticed that in the files downloaded there is a onewire.h and a onewire.cpp but unlike the other libraries there is no onewire.o file. Do I need to compile the code and what would be the best way to do that?  :-/ Thanks.
14  Forum 2005-2010 (read only) / Interfacing / Re: Arduino and 1-wire on: May 20, 2008, 09:58:09 pm
TomP, I'm trying to compile the sample.c program that comes with the OneWire library. Like I say I'm new to the Arduino and have not programmed in c for several (many?) years. Perhaps I'm just doing it wrong. Thanks for trying to help.
15  Forum 2005-2010 (read only) / Interfacing / Re: Arduino and 1-wire on: May 11, 2008, 11:12:51 pm
Well, I'm just joining this discussion because I have a new Arduino and have been building a weather station so when I saw Arduino and OneWire in the same post I jumped at the chance. I'm using the 0011 version and put the files in arduino-0011\hardware\libraries\OneWire but I get an error about
OneWire::OneWire(unsigned char)'o: In function `loop':
I'm still going through the messages but if anyone has the fix I would appreciate it.

Thanks, Stephen
Pages: [1] 2 3 ... 21