Show Posts
Pages: [1]
1  Using Arduino / Installation & Troubleshooting / Error while uploading the program- Help Us on: May 14, 2011, 02:50:24 am
Hai
I am having trouble with progrramming my Arduino atmega168 serial.
when i am trying to program, it shows

avrdude: stk500_getsync(): not in sync: resp=0*00
avrdude: stk500_disable(): protocol error, expect=0*14, resp=0*51


what we have to do...???
we are in the middle of our project, wifi robot, and when our wifi router is connected to arduino, the receiver led glows permanently and no expected output is obtained..
please help us as soon as possible...
arjun_janan@yahoo.co.in
2  Using Arduino / Programming Questions / Error while Programming- Help Us on: May 14, 2011, 02:01:57 am
Hai
I am having trouble with progrramming my Arduino atmega168 serial.
when i am trying to program, it shows

avrdude: stk500_getsync(): not in sync: resp=0*00
avrdude: stk500_disable(): protocol error, expect=0*14, resp=0*51

what we have to do...???
we are in the middle of our project, wifi robot, and when our wifi router is connected to arduino, the receiver led glows permanently and no expected output is obtained..
please help us as soon as possible...
arjun_janan@yahoo.co.in
3  Using Arduino / Project Guidance / Arduino Ethernet Shield on: March 30, 2011, 12:42:06 pm
We are doing a Wifi Robot Project, in which we are decided to implement some sensors (temp,pressure etc.).
Can we use an Arduino Ethernet Shield for send data from Arduino to the WiFi Router.
We have an Arduino(Atmega 168 serial).
is it possible to interface our Arduino with Ethernet Shield.

if so please give us some soiftware details to visualize the output....
4  Using Arduino / Programming Questions / Any one know openWRT on: March 23, 2011, 01:34:59 am
Any one know how to write a program in openWRT wifi router.
i am doing a project with Arduino , i need to receive data from arduino and sent to computer through the WiFi router....
5  Topics / Robotics / Re: WiFi Robot With sensors on: March 23, 2011, 01:15:32 am
http://www.jbprojects.net/projects/wifirobot/ is our project page in which Our Problem is , we are making a  Wifi Robot Having 4-9 movements and some Sensing Abilities like Temperature, Pressure, Metal Detection, etc.
We already have a Carserver.c in openWRT to install on the router for movements ,and we have to modify it for sensing purposes.

So can give us an openWRT Code for accept the data (from the sensors) from the serial port of the WiFi router (Linksys  WRT54GL with openWRT Firmware ) and send it to the Laptop.
If u can please help us...

Go Bless U....!!!!
6  Using Arduino / Project Guidance / Re: WiFi Robot With Sensor on: March 23, 2011, 01:05:44 am
What u mean by " U see the issue here"
7  Topics / Device Hacking / open WRT Router Program on: March 22, 2011, 06:19:13 am
We are very sad to say that we didint got any suitable reply from this forum For our frequent Posts..
I hope this post will not be..!!!!

Our Problem is , we are making a  Wifi Robot Having 4-9 movements and some Sensing Abilities like Temperature, Pressure, Metal Detection, etc.
We already have a Carserver.c in openWRT to install on the router for movements ,and we have to modify it for sensing purposes.

*********************************************
So can give us an openWRT Code for accept the data (from the sensors) from the serial port of the WiFi router (Linksys  WRT54GL with openWRT Firmware ) and send it to the Laptop.
If u can please help us...

Go Bless U....!!!!
********************************************
8  Topics / Robotics / WiFi Robot With Sensor on: March 22, 2011, 06:18:14 am
We are very sad to say that we didint got any suitable reply from this forum For our frequent Posts..
I hope this post will not be..!!!!

Our Problem is , we are making a  Wifi Robot Having 4-9 movements and some Sensing Abilities like Temperature, Pressure, Metal Detection, etc.
We already have a Carserver.c in openWRT to install on the router for movements ,and we have to modify it for sensing purposes.

*********************************************
So can give us an openWRT Code for accept the data (from the sensors) from the serial port of the WiFi router (Linksys  WRT54GL with openWRT Firmware ) and send it to the Laptop.
If u can please help us...

Go Bless U....!!!!
********************************************
9  Using Arduino / Project Guidance / WiFi Robot With Sensor on: March 22, 2011, 06:14:56 am
We are very sad to say that we didint got any suitable reply from this forum For our frequent Posts..
I hope this post will not be..!!!!

We are making a  Wifi Robot Having 4-9 movements and some Sensing Abilities like Temperature, Pressure, Metal Detection, etc.
We already have a Carserver.c in openWRT to install on the router for movements ,and we have to modify it for sensing purposes.

*********************************************
So can give us an openWRT Code for accept the data(from the sensors) from the serial port of the WiFi router (Linksys  WRT54GL with openWRT Firmware ) and send it to the Laptop.
If u can please help us...

Go Bless U....!!!!
********************************************
10  Topics / Robotics / WiFi Robot With sensors on: March 10, 2011, 12:27:33 pm

Hai,
Our main project 'WiFi Robot', and as additions,we decided to implement Temperature,Humidity,...etc Sensors..
We want the open WRT instructions for this topic..
Can any one Help me...

There are three pieces of software that make this project possible. The VB6 Wifi_Robot client application (runs on Windows), the CarServer which is written in C and runs on the router running OpenWRT WhiteRussian v0.9 (Linux), and the microcontroller firmware.

**please suggest us some sensors and relevant ideas for our WiFi robot******

also we have a program loaded to our router only for reception of data transmitted via wifi. we have the controller program for the modifications but we need your help to modify the carserver program and make it suitable for the transmission of data(output from temperature sensor) from the  arduino to the computer via the WiFi router which is  connected serially to the arduino .
the car server server program now we have on the router is given below.
also we want to know how we can visulise these out puts on the computer

my email : arjun_janan@yahoo.co.in
Thanks in advance...
11  Using Arduino / Project Guidance / Wifi router temperature sensing.. on: March 10, 2011, 08:01:55 am

Hai,
For my main project, We designed a WiFi Robot car, and as additions,we decided to implement Temperature,Humidity,...etc Sensors..
We want the open WRT instructions for this topic..
Can any one Help me...
my email : arjun_janan@yahoo.co.in
Thanks in advance...
Pages: [1]