Show Posts
Pages: 1 [2] 3 4 ... 6
16  International / Generale / Re: Buon anno! on: January 01, 2013, 11:18:11 am
Auguri a tutti dal team di freedomotic.com!!
17  Topics / Home Automation and Networked Objects / Re: Touch And Remote Control Intelligent Switch on: January 01, 2013, 11:11:36 am
Hi your idea is very insteresting.
We are working on an open source domotic framework http://freedomotic.com.
if you want you can develop a plugin to control your devices from our framework by graphical interface and create complex automation.
Regards
18  International / Megatopic / Re: OT: raspberry pc ultra low cost, per smanettoni on: November 26, 2012, 08:34:55 am
grazie della segnalazione relativa al gruppo
abbiamo comunque attivato la sezione ufficiale in italiano http://www.raspberrypi.org/phpBB3/viewforum.php?f=79
saluti
19  Topics / Home Automation and Networked Objects / Re: Freedomotic open source automation and arduino on: November 24, 2012, 05:37:16 am
The project is growing. All its features in this whitepaper http://freedomotic.googlecode.com/files/freedomotic-whitepaper-v1.4.pdf
Regards
20  International / Megatopic / Re: OT: raspberry pc ultra low cost, per smanettoni on: November 19, 2012, 11:57:06 am
Salve a tutti,
stiamo cercando di far aprire una sezione in italiano sul forum ufficiale del raspberry
Se siete interessati sottoscrivete questo post http://www.raspberrypi.org/phpBB3/viewtopic.php?f=24&t=22604
Più siamo meglio é!!
Grazie
21  International / Hardware / Re: consigli per sensori biomedicali on: November 17, 2012, 04:29:49 am
Ciao,
nel team abbiamo un medico di medicina generale per la consulenza "scientifica" e la supervisione.
Approfitto della tua risposta (suppongo tu abbia esperienza nel campo) per chiedere se questo tipo di sensori http://www.seeedstudio.com/depot/medical-c-197.html possono essere utilizzati senza violare normative.
Per esempio la lettura della frequenza cardiaca o dell'ossigenazione fatta dai sensori richiederebbe una valutazione medica per stabilire se é o meno nella norma, ma dal punto di vista "tecnico" sarebbe ok o sbaglio?
22  International / Hardware / consigli per sensori biomedicali on: November 17, 2012, 03:23:15 am
Salve a tutti
stiamo cercando di realizzare una piccola medstation per monitorare i parametri vitali quali frequenza cardiaca, temperatura corporea, ossigenazione ecc.
Lo scopo é di inviare questi dati al ns software domotico in primis per l'assistenza a persone disabili o anziani. Il software può essere programmato per effettuare delle azioni tipo inviare mail, tweet o sms (in base ai moduli di cui si dispone) qualora ci fosse qualche problema. Allo stesso modo si potrebbe adattare l'ambiente alle condizioni del paziente: se prova caldo avviare il condizionatore o viceversa il riscaldamento ecc.
Inoltre qesti dati potrebbero essere memorizzati per generare dei grafici da mostrare al medico.
Ora, senza avere la pretesa di sostituire soluzioni ad-hoc sul mercato (sicuramente affidabilissime ma anche costose in molti casi) vorremmo qualche consiglio sui sensori disponibili. I requisiti dovrebbero essere: affidabilità (con tutte le possibili limitazioni rispetto a prodotti di "fascia alta") economicità e possibilità di interfacciamento.
In internet ci sono diverse soluzioni ma é difficile scegliere. Sappiamo che per arduino esistono dei sensori indossabili.
Quindi se qualcuno più esperto potesse darci dei consigli (meglio ancora se opera nel settore e quindi ha esperienza diretta) potremmo fare delle scelte "oculate".
Grazie a tutti
23  Topics / Home Automation and Networked Objects / Re: Freedomotic open source automation and arduino on: September 16, 2012, 04:48:59 am
Any suggestion for the sound theme?
Regards
24  Topics / Home Automation and Networked Objects / Re: Freedomotic open source automation and arduino on: September 15, 2012, 12:34:44 pm
The new official Freedomotic Youtube channel is active!
You will find video tutorials and case studies with the material provided by our users.
If you use Freedomotic and you've created a video send it to us. It will be published on the official channel!
So sign up on http://www.youtube.com/freedomotic and share with your friends.
25  Topics / Home Automation and Networked Objects / Re: SmartStrip - Yet another web GUI for relay control on: August 27, 2012, 10:45:02 am
Hi very interesting project!
It could be controlled by a SCADA/domotic software to work together other devices.
We have created plugins for ipx800 boards or progetti-hwsw boards. So with a single software you can control different technologies.
I think your system is similar to these devices.
More info at:
http://freedomotic.com/content/plugins/ipx800
http://freedomotic.com/forum/tcp-progetti-hw-sw-board-plugin

Regards
26  International / Software / Re: Domotica con Arduino on: August 27, 2012, 10:37:11 am
Su Linux esiste festival che può riprodurre il parlato, anche in italiano. E Perlbox per acquisire comandi audio.

per il parlato abbiamo risolto con espeak sia per win che per linux includendo le librerie nel plugin in java
per il parlato siamo alla ricerca di una buona soluzione: via hardware ho provato easyvr ma é speaker dependent mentre via software per java esiste sphinx ma é abbastanza complesso da configurare e non supporta l'italiano al momento
27  International / Software / Re: Domotica con Arduino on: August 27, 2012, 07:53:05 am
ciao,
esiste la possibilità di programmare la kinect in java
farebbe molto comodo al nostro progetto domotico riuscire ad impartire dei comandi qualunque sia il sistem operativo utilizzato
il software é scritto in java proprio per questo motivo
grazie
28  International / Hardware / Re: Sistema di ambient intelligence on: August 26, 2012, 08:16:13 am
Ciao, progetto molto interessante.
Se ti interessa qualche spunto per il sistema di supervisione dai un'occhiata al nostro framework domotico
freedomotic.com
Saluti
29  Topics / Home Automation and Networked Objects / Re: Remote Temperature Sensor on: August 05, 2012, 08:06:02 am
Very nice project! Can you post more details? What frequency does it use?
Regards
30  Topics / Home Automation and Networked Objects / Re: Freedomotic open source automation and arduino on: August 04, 2012, 10:13:55 am
Hi to all,

Freedomotic v5.3.0 is finally out!
It's completely new with many interesting features and improvements.

DEFAULT FRONTEND:

Now it is more user friendly.
Added a drag&drop environment editor: no need to edit the xml files by hand to define your enviroment.
The objects can now be created and positioned by drag&drop over the environment.
Added a zero-configuration synoptic: a static background image could be used instead of a full description of the environment topology. (For advanced and more detailed environment configuration the vectorial map is still available)

MARKETPLACE:

The plugins can be easy installable from a menu without the need of download them manually from the web browser.


CORE:

Added stomp and websockets connections.
Update the apache ActiveMQ to the last version.
Changed the way automations (scenarios) are defined, now is much easier and intutive thanks to the use of nearly natural language

and much more ....

DEVELOPMENT

We have switched to GIT as our main version control system. This allows a better development workflows.
Clone freedomotic at: http://code.google.com/p/freedomotic/
Dailybuilds are created with every change.


Freedomotic.com has also changed its aspect. New logo, new web design and a lot of improvements on the documentation.

Discover its potential. Download from http://freedomotic.googlecode.com/files/Freedomotic_v5.3.0.zip

Our community is growing up with new developers, testers and people interested in building automation, so we want to thank you all.

PROJECTS IN PROGRESS
We have enhanced our framework following your suggestions, now it has better performances, many fixed bugs and new features. The developers of our community have recently added new great plugins like:


OpenWebNet Plugin to communicate with MyHome BTicino systems.
The TV Object and the new Pioneer Kuro TV Plugin to control Pioneer TVs via USB.
Souliss Plugin to communicate with Souliss Arduino library
RestApi plugin to expose Freedomotic evironment data using REST services. This is useful for example to create third party frontends
Web client for controlling the framework with a simple browser and much more...


Check out project todo list at http://freedomotic.com/content/orphan-projects and if you want to applicate for a project write on the forum or send a mail to info@freedomotic.com


WE WANT YOU
Feedomotic is a collaborative project so we want more people to contribute. We are searching for:

developers
designers (for GUI and project visual layout)
testers (for debugging, improvements, testing on embedded systems)
technical writers (for documentation review)

and anybody who wants to say something about building automation.

SOCIAL FREEDOMOTIC
Follow us on Facebook (http://www.facebook.com/pages/Freedomotic-Open-Source-Building-Automatio...) and Twitter (http://twitter.com/Freedomotic) and share with your friends to help us grow.

If you want to develop for Freedomotic join our developers mailing list at https://groups.google.com/forum/#%21forum/freedom-domotics to find kind people ready to help you.

Stay tuned for more news!

Best regards,
Freedomotic Staff
Pages: 1 [2] 3 4 ... 6