Show Posts
Pages: 1 ... 6 7 [8]
106  Forum 2005-2010 (read only) / Bar Sport / Re: Supply from China, suggestions please? on: October 17, 2008, 09:21:14 am
HULK - There are countless dimensions, and customized manufacturing is possible. But for <10 pcs, I have to check the market for ready-to-go samples. Here is one might meet your requirement: http://www.seeedstudio.com/depot/aluminium-case-for-small-projects-1138035-mm-with-ears-p-155.html
And the LCD is arrived, we have lit it to validate. It's exactly the same with the one your ordered, but pure gray indeed.: http://www.seeedstudio.com/depot/graphic-lcd-12864-ks0108-ctrl-white-and-dark-gray-p-152.html

Phil - Thanks for the inquiry. We are now increasing our stock, so it would be greatly appreciated for suggest your demands, we don't consider it an obligation to order at all. smiley-wink
1) There are very wide selection of these joysticks here, I'll choose some kind with great quality and list them.
2) I have seen these small LCDs, likely 128*128. They are usually FPC plugs, we will supply some jack for it whenever sourced.

107  Forum 2005-2010 (read only) / Bar Sport / Re: Supply from China, suggestions please? on: October 16, 2008, 08:44:14 am
The LCD you ordered is 92mm*70mm*12mm, you may want to give me a range of internal dimension that I'll ask the supplier for a fit one.

Looking forward to see your project whenever finishes;D
108  Forum 2005-2010 (read only) / Bar Sport / Re: Supply from China, suggestions please? on: October 16, 2008, 07:57:09 am
I don't find such small case with water-proof rubber, but there are really some good cases from our supplier. Here is a close one:

http://www.seeedstudio.com/depot/aluminium-case-for-small-projects-p-154.html

109  Forum 2005-2010 (read only) / Bar Sport / Re: Supply from China, suggestions please? on: October 14, 2008, 05:31:48 am
HULK - I'm afraid there is not going to be exactly same case, but there are some shell for hardrivers are fancy and elegant too. Let me check them out and reply later. Very nice selection! smiley-wink
110  Forum 2005-2010 (read only) / Bar Sport / Re: Supply from China, suggestions please? on: October 13, 2008, 07:40:32 pm
Sure, my apologize for the rash statement. We are working on the library now, thanks!  smiley
111  Forum 2005-2010 (read only) / Bar Sport / Re: Supply from China, suggestions please? on: October 13, 2008, 10:15:32 am
Hulk -  Let us test the one with probe pins tommorow for all your questions smiley

mem - We have tested the 12864 ones in hand with the library and they worked fine. The 19264 ones has difference in pin15 and pin16 used for CS, http://www.topwaydisplay.com/Pub/Manual/LM19264ABY-Manual-Rev0.1.pdf. It would be grateful if you could mod the library to handle the 00 state. Anyway, we should be cautious in stating the compatibility, excuse us for that.   :-[
112  Forum 2005-2010 (read only) / Bar Sport / Re: Supply from China, suggestions please? on: October 13, 2008, 05:11:15 am
Check this out:
http://www.seeedstudio.com/depot/graphic-lcd-12864-ks0108-ctrl-white-and-dark-gray-p-152.html

 smiley-wink
113  Forum 2005-2010 (read only) / Bar Sport / Re: Supply from China, suggestions please? on: October 08, 2008, 11:13:18 am
Hulk- Excuse us for keep you waiting so long. smiley-wink

We have sourced some KS0108 compatible LCD in stock now. You may check them out in our LCD section: http://www.seeedstudio.com/depot/parts-lcd-c-32_8.html

From our current supplier, we haven't got 12864 ones in Gray/Black or B/W with KS0108 controller. If you could wait for about one week, we could source one and validate its quality, but the price would be a little higer since we might not want to buy in bulks.

Maybe you want to try 192*64 ones instead? They are awesome too and with in your dimension.
114  Forum 2005-2010 (read only) / Bar Sport / Re: Supply from China, suggestions please? on: September 30, 2008, 02:39:04 am
I need to check the price for B/W or gray/Black ones, the supplier is not working these days. I'll keep you posted whenever quote is ready.

Also, please let me know you have preference for size. Appreciated smiley-wink
115  Forum 2005-2010 (read only) / Bar Sport / Re: Supply from China, suggestions please? on: September 30, 2008, 02:10:31 am
Sure, I have some Blue backlight ones like this: http://www.seeedstudio.com/depot/graphic-lcd-128x64-stn-led-backlight-p-92.html

How many do you need for B/W ones? I'll put some online after 6th, it's national holiday now.

Thanks
116  Forum 2005-2010 (read only) / Bar Sport / Supply from China, suggestions please? on: August 18, 2008, 01:56:00 am
Hi, Guys:

This is Eric, I'm a fans of Arduino from China.

I've created a tiny studio in focus of interaction engineering, in hope of creating a business of hobby. Here is the link: www.seeedstudio.com .

Suggestions are sincerely welcomed~ smiley-wink

Thanks,

Eric

(I'm not sure if it is OK to discuss business in the forum, apologize if I overlooked the rule.)
Pages: 1 ... 6 7 [8]