Show Posts
Pages: 1 2 [3] 4
31  Forum 2005-2010 (read only) / Development / Re: ATTiny85 port (work in progress) on: June 09, 2010, 02:56:55 pm
have you seen this port
http://sites.google.com/site/elettronicaarduinoesperimenti/Home/arduino-ide-and-attiny45
it should be vary similar to this one
32  Forum 2005-2010 (read only) / Development / Re: Boot Cloner for Arduino Atmega 328 on: November 09, 2010, 04:31:09 am
use this instead of data_blink.h in isp_prepare sketch
i believe it should work but i haven't tested it fully

Code:
// This file was generated by hex2c.tcl on Tue Nov 09 11:29:03 +0200 2010

struct { const char* title; unsigned start, off, count; } sections[] = {
 {"2010-10-02 optiboot_atmega328.hex         492b @ 0x7E00",0x7E00,0,492},
 {"2010-06-08 Blink.cpp.hex                  896b @ 0x0000",0x0000,492,896},
};

const unsigned char progdata[] PROGMEM = {
 133,224,128,147,129,0,130,224,128,147,192,0,136,225,128,147,193,0,134,224,128,
 147,194,0,128,225,128,147,196,0,132,183,20,190,129,255,208,208,141,224,200,208,
 37,154,134,224,32,227,60,239,145,224,48,147,133,0,32,147,132,0,150,187,176,155,
 254,207,29,154,168,149,129,80,169,247,221,36,211,148,165,224,234,46,241,225,
 255,46,164,208,129,52,33,244,129,224,190,208,131,224,36,192,130,52,17,244,132,
 225,3,192,133,52,25,244,133,224,180,208,138,192,133,53,161,244,146,208,8,47,16,
 224,16,147,1,2,0,147,0,2,139,208,144,224,152,47,136,39,128,43,145,43,136,15,
 153,31,144,147,1,2,128,147,0,2,115,192,134,53,41,244,132,224,153,208,128,224,
 113,208,109,192,132,54,9,240,67,192,124,208,224,145,0,2,240,145,1,2,131,224,
 128,147,87,0,232,149,192,224,209,224,105,208,137,147,128,145,2,2,129,80,128,
 147,2,2,136,35,185,247,120,208,7,182,0,252,253,207,64,145,0,2,80,145,1,2,160,
 224,177,224,44,145,48,224,17,150,140,145,17,151,144,224,152,47,136,39,130,43,
 147,43,18,150,250,1,12,1,208,146,87,0,232,149,17,36,78,95,95,79,241,224,160,56,
 191,7,73,247,224,145,0,2,240,145,1,2,224,146,87,0,232,149,7,182,0,252,253,207,
 240,146,87,0,232,149,39,192,132,55,185,244,55,208,70,208,224,145,0,2,240,145,1,
 2,49,150,240,147,1,2,224,147,0,2,49,151,228,145,142,47,25,208,128,145,2,2,129,
 80,128,147,2,2,136,35,97,247,14,192,133,55,57,244,46,208,142,225,12,208,133,
 233,10,208,143,224,150,207,129,53,17,244,136,224,25,208,35,208,128,225,1,208,
 99,207,152,47,128,145,192,0,133,255,252,207,144,147,198,0,8,149,168,149,128,
 145,192,0,135,255,252,207,128,145,198,0,8,149,247,223,246,223,128,147,2,2,243,
 207,224,230,240,224,152,225,144,131,128,131,8,149,128,224,248,223,238,39,255,
 39,9,148,231,223,128,50,9,240,247,223,132,225,218,207,31,147,24,47,223,223,17,
 80,233,247,244,223,31,145,8,149,12,148,97,0,12,148,126,0,12,148,126,0,12,148,
 126,0,12,148,126,0,12,148,126,0,12,148,126,0,12,148,126,0,12,148,126,0,12,148,
 126,0,12,148,126,0,12,148,126,0,12,148,126,0,12,148,126,0,12,148,126,0,12,148,
 126,0,12,148,157,0,12,148,126,0,12,148,126,0,12,148,126,0,12,148,126,0,12,148,
 126,0,12,148,126,0,12,148,126,0,12,148,126,0,12,148,126,0,0,0,0,0,36,0,39,0,42,
 0,0,0,0,0,37,0,40,0,43,0,0,0,0,0,35,0,38,0,41,0,4,4,4,4,4,4,4,4,2,2,2,2,2,2,3,
 3,3,3,3,3,1,2,4,8,16,32,64,128,1,2,4,8,16,32,1,2,4,8,16,32,0,0,0,7,0,2,1,0,0,3,
 4,6,0,0,0,0,0,0,0,0,17,36,31,190,207,239,216,224,222,191,205,191,17,224,160,
 224,177,224,238,231,243,224,2,192,5,144,13,146,162,48,177,7,217,247,17,224,162,
 224,177,224,1,192,29,146,171,48,177,7,225,247,14,148,182,1,12,148,189,1,12,148,
 0,0,128,145,0,1,97,224,14,148,105,1,104,238,115,224,128,224,144,224,14,148,229,
 0,128,145,0,1,96,224,14,148,105,1,104,238,115,224,128,224,144,224,14,148,229,0,
 8,149,128,145,0,1,97,224,14,148,73,1,8,149,31,146,15,146,15,182,15,146,17,36,
 47,147,63,147,143,147,159,147,175,147,191,147,128,145,6,1,144,145,7,1,160,145,
 8,1,176,145,9,1,48,145,10,1,1,150,161,29,177,29,35,47,45,95,45,55,32,240,45,87,
 1,150,161,29,177,29,32,147,10,1,128,147,6,1,144,147,7,1,160,147,8,1,176,147,9,
 1,128,145,2,1,144,145,3,1,160,145,4,1,176,145,5,1,1,150,161,29,177,29,128,147,
 2,1,144,147,3,1,160,147,4,1,176,147,5,1,191,145,175,145,159,145,143,145,63,145,
 47,145,15,144,15,190,15,144,31,144,24,149,239,146,255,146,15,147,31,147,123,1,
 140,1,143,183,248,148,64,145,6,1,80,145,7,1,96,145,8,1,112,145,9,1,143,191,47,
 183,248,148,128,145,6,1,144,145,7,1,160,145,8,1,176,145,9,1,47,191,132,27,149,
 11,166,11,183,11,232,22,249,6,10,7,27,7,96,247,31,145,15,145,255,144,239,144,8,
 149,120,148,132,181,130,96,132,189,132,181,129,96,132,189,133,181,130,96,133,
 189,133,181,129,96,133,189,238,230,240,224,128,129,129,96,128,131,225,232,240,
 224,128,129,130,96,128,131,128,129,129,96,128,131,224,232,240,224,128,129,129,
 96,128,131,225,235,240,224,128,129,132,96,128,131,224,235,240,224,128,129,129,
 96,128,131,234,231,240,224,128,129,132,96,128,131,128,129,130,96,128,131,128,
 129,129,96,128,131,128,129,128,104,128,131,16,146,193,0,8,149,40,47,48,224,201,
 1,134,86,159,79,252,1,148,145,42,87,63,79,249,1,132,145,136,35,145,240,232,47,
 240,224,238,15,255,31,232,89,255,79,165,145,180,145,102,35,41,244,140,145,144,
 149,137,35,140,147,8,149,140,145,137,43,140,147,8,149,72,47,80,224,202,1,130,
 85,159,79,252,1,36,145,202,1,134,86,159,79,252,1,148,145,74,87,95,79,250,1,52,
 145,51,35,209,241,34,35,49,241,35,48,33,244,128,145,128,0,143,119,5,192,36,48,
 49,244,128,145,128,0,143,125,128,147,128,0,24,192,33,48,25,244,132,181,143,119,
 4,192,34,48,33,244,132,181,143,125,132,189,13,192,38,48,33,244,128,145,176,0,
 143,119,5,192,39,48,41,244,128,145,176,0,143,125,128,147,176,0,227,47,240,224,
 238,15,255,31,238,88,255,79,165,145,180,145,102,35,41,244,140,145,144,149,137,
 35,140,147,8,149,140,145,137,43,140,147,8,149,14,148,15,1,14,148,151,0,14,148,
 128,0,253,207,248,148,255,207,13,0,
};

please let me know if this solves your problem
33  Forum 2005-2010 (read only) / Development / Re: Boot Cloner for Arduino Atmega 328 on: November 08, 2010, 03:24:15 pm

choose:
Arduino Duemilanove or Nano w/ ATmega328

I will try to make and post a sketch usable for the Uno
tomorrow(but no promises)
34  Forum 2005-2010 (read only) / Development / Re: Boot Cloner for Arduino Atmega 328 on: November 08, 2010, 02:00:35 pm
if by IDE you mean bootloader
then after the first time you prepare the atmega
you will be able to use it as any normal arduino

just one note however:
when you follow his guide you will get the bootloader for the old boards
so you will need to change your board in the menu every time you use the new atmega
or edit the prepare sketch
35  Forum 2005-2010 (read only) / Development / Re: Boot Cloner for Arduino Atmega 328 on: November 08, 2010, 06:50:52 am
this should answer your problem
http://jeelabs.org/2010/04/25/preparing-atmegas-with-isp/
36  Forum 2005-2010 (read only) / Interfacing / Re: Really need help with acs712 and Arduino on: May 28, 2010, 02:16:56 pm
this web site has information on the subject i think you can use the acs712 insted of the CT sensor
http://openenergymonitor.org/emon/
37  Forum 2005-2010 (read only) / Interfacing / Re: RS485 bus clash detecting on: September 03, 2010, 04:28:09 am
i dont think that the detection is possible or needed
in most cases the receiver is in receive mode/disabled all the its not sending
and the protocol should handle the changing of modes
38  Forum 2005-2010 (read only) / Interfacing / Re: Computer Free Programmer on: June 19, 2010, 04:06:16 am
try this
http://news.jeelabs.org/2010/05/18/multi-isp-programmer/
39  Forum 2005-2010 (read only) / Interfacing / Re: Connect 2 arduino's with wires on: June 02, 2010, 03:13:10 pm
it might be a bit over kill but some implantation of rs-485
which is for long distance also multiple devices
might be good
i am using modbus protocol over rs-485 with 4 arduino's
http://sites.google.com/site/jpmzometa/
40  Forum 2005-2010 (read only) / Interfacing / Re: WIZ812MJ net module on: May 28, 2010, 02:46:02 pm
this page has schematics and a guide on using it with the mega board
http://www.nkcelectronics.com/nkc-ethernet-shield-for-arduino-mega--duemilanove--diecimila-diy-kit.html
41  Forum 2005-2010 (read only) / Interfacing / Re: i2c port expander PCF8574 as input on: December 03, 2009, 10:11:03 am
Can you please post the working code
42  Forum 2005-2010 (read only) / Exhibition / Re: LumiNet (based on attiny84) on: June 12, 2010, 05:16:35 am
in the original bootloader makefile there is this line
Code:
LDSECTION  = --section-start=.text=0x3800

by my understanding it means where in the memory to put the sketch
if you add it to the sketch makefile and adjust it to the end of your bootloader i think it should work
43  Forum 2005-2010 (read only) / Exhibition / Re: LumiNet (based on attiny84) on: May 05, 2010, 03:02:36 am
its really of topic but yes you can burn an bootloader from the ide but you need a one pre-burned arduino or isp
if you look back in this thread you can find a guide
44  Forum 2005-2010 (read only) / Exhibition / Re: LumiNet (based on attiny84) on: February 09, 2010, 04:08:38 pm
I think the speed should be 19200
and the protocol stk500v1

45  Forum 2005-2010 (read only) / Exhibition / Re: LumiNet (based on attiny84) on: February 08, 2010, 08:31:42 am
From reading the code it should work with Attiny on a breadboard
and an Arduino as a programmer
But i didn't try it my self because i don't have any Attiny at hand
Pages: 1 2 [3] 4