Show Posts
Pages: 1 [2] 3 4 ... 18
16  Forum 2005-2010 (read only) / Interfacing / Re: Bootloader burning hardware? on: December 16, 2009, 08:58:46 am
I use the Pocket AVR programmer from Sparkfun http://www.sparkfun.com/commerce/product_info.php?products_id=9231 for burning the bootloader on atmega168, 328, and 644. So, it works perfectly!
The only thing is that you will perhaps have to plug it into an usb hub if you're on a Mac, otherwise perfect and cheap!
17  Forum 2005-2010 (read only) / Development / Re: Recotana's OSC Library on: November 25, 2010, 04:16:10 pm
I'm currently using Arduino 018 just for this excellent library, waiting for an update.
18  Forum 2005-2010 (read only) / Development / Re: Recotana's OSC Library on: October 21, 2010, 01:16:33 am
Begin with the examples, modify and put together some to do what you need and you will progressively understand it and be able to do everything by yourself. But take your time. smiley-wink
19  Forum 2005-2010 (read only) / Development / Re: Recotana's OSC Library on: October 21, 2010, 01:12:30 am
I'm sorry to say that but you probably need to use Arduino 18 (as I do) for the library while waiting for an update.
20  Forum 2005-2010 (read only) / Development / Re: Arduino IDE with ATTiny45 (porting) on: November 03, 2009, 09:21:27 am
Thanks, that's highly interesting! I have to try it out.
It seems that hardware PWM is not available on the attiny45, but is the I2C bus working? (I am interested using it as slave.)
21  Forum 2005-2010 (read only) / Development / Re: Making OSC lib Sanguino-compatible on: December 16, 2009, 06:43:51 am
I think I got it : I added
Code:
extern "C" {
#include "utility/types.h"
}
to Client.h
Now I have to find where the connection problem is!
I connected MOSI-MISI-SCK-5V-GND and supplied 3.3V but...
22  Forum 2005-2010 (read only) / Development / Making OSC lib Sanguino-compatible on: December 15, 2009, 12:50:41 pm
Hi!

I'm trying to make reconata's OSC lib http://recotana.com/recotanablog/?page_id=222 compatible with the Sanguino.
The point is that Sanguino gives a replacement for Arduino's ethernet lib et so does reconata.

So far, I think I managed to add the changes for OSC to the Sanguino one, but I get the following error on compilation :
Quote
(...)/Ethernet/Client.h:19: error: 'size_t' has not been declared
and I can't find where to declare it.

I uploaded my lib here http://dl.dropbox.com/u/1871392/EthernetOSC.zip

Anyone can have a look?

thanks smiley-wink
23  Forum 2005-2010 (read only) / Development / Re: Creating a class: syntax on: September 09, 2009, 12:26:53 am
Thanks, I finally put it really in a lib. That was what I planned, but not immediately!
BTW you don't need to complile it first if you use the IDE.

Ok, for the inline, someone wrote about it a bit higher, so I used it... and I need the smallest binary possible! What's the speed difference?

I will continue and to all my code in the lib!
24  Forum 2005-2010 (read only) / Development / Re: Creating a class: syntax on: September 08, 2009, 02:55:10 pm
The file is classPad.pde (I guessed .h but the IDE created it like that) and #include "classPad.pde" gives me a "no such file" error...
Note that it was not needed to make the include with all the other tabs!
25  Forum 2005-2010 (read only) / Development / Re: Creating a class: syntax on: September 08, 2009, 10:06:52 am
Hm it seems it's because it's in a tab. How to fix that?
26  Forum 2005-2010 (read only) / Development / Re: Creating a class: syntax on: September 08, 2009, 10:02:09 am
Thanks for your help!

But still:
Quote
error: 'Pad' does not name a type
:-/
27  Forum 2005-2010 (read only) / Development / Re: Creating a class: syntax on: September 08, 2009, 09:15:32 am
I opened a new tab (arrow on the right), so that it's being merged.
(and it is for all the other tabs!)
28  Forum 2005-2010 (read only) / Development / Creating a class: syntax on: September 08, 2009, 08:35:06 am
Hi!

I'm using classes in Processing without issue, but in Arduino the syntax seems different?

Can you tell me what's wrong here?
Code:
Pad pad0;

void setup() {
  pad0=new Pad(0,BTN_PAD0);
(...)
}
Code:
class Pad{
  int numero;
  int pin;
  
 
 Pad(int tempnumero, int temppin){
   numero=tempnumero;
   pin=temppin;
 }
  
};
Quote
error: 'Pad' does not name a type In function 'void setup()':
Thanks!
29  Forum 2005-2010 (read only) / Français / Re: Référence Arduino en français en ligne on: February 20, 2010, 08:41:31 pm
Ah, parfait dans ce cas !
30  Forum 2005-2010 (read only) / Français / Re: Référence Arduino en français en ligne on: February 20, 2010, 12:25:29 pm
Dans l'avant-dernière note de Blog d'Arduino.cc :
Quote
* in parallel and thanks to a very friendly French user (X. Hinault) we are going to prepare the new reference in French, I will be porting it to the official arduino.cc/fr soon.
Tu devrais peut-être te mettre en relation avec eux pour éviter de faire deux fois la même chose et risquer de te faire cannibaliser par l' "officielle" ?

Sinon, beau travail ! smiley
Pages: 1 [2] 3 4 ... 18