Show Posts
Pages: [1]
1  Using Arduino / Installation & Troubleshooting / Re: Arduino Nano-Bought from dealextreme.com-D8 pin is high by default. on: April 27, 2012, 08:22:12 am
I thinke this question is the fuse CKOUT has been program,you can re-program the bootloader if you have ISP download cable,the bootloader file is in the path: \arduino-0022\hardware\arduino\bootloaders\atmega\ATmegaBOOT_168_atmega328.hex,
Fuse setting as follow:
atmega328.bootloader.low_fuses=0xFF
atmega328.bootloader.high_fuses=0xDA
atmega328.bootloader.extended_fuses=0x05
atmega328.bootloader.lock_bits=0x0F
good luck!
Pages: [1]