Arduino Forum

Using Arduino => Installation & Troubleshooting => Topic started by: sahayajensy on Jun 18, 2018, 12:42 pm

Title: Trouble uploading sketch to Arduino UNO
Post by: sahayajensy on Jun 18, 2018, 12:42 pm
I am new to Arduino and I am having difficulty while trying to upload sketch to my Arduino UNO board.  I get the following errors.



avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x83

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x83

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x83

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x83

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x83

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x83

Problem uploading to board.  See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x83

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x83

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x83

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x83


Kindly guide me..
Thank you
Title: Re: Trouble uploading sketch to Arduino UNO
Post by: sterretje on Jun 18, 2018, 03:40 pm
Some things to check.
1)
Is the board recognised by device manager (or its Linux/Mac counterparts)?
2)
Did you select the correct com port in the IDE?