Topic: Nunchuk Eagle
(Read 2002 times)
May 06, 2013, 02:10 am
: May 08, 2013, 04:29 am by Paulware
There was a nunchuk eagle topic started a couple years ago but it was not answered and is now closed.
I also would like to make a nunchuk adapter in eagle. I know they are available at sparkfun.
The nunchuk adapter is basically 4 connectors. 2 on the top and 2 on the bottom.
They are .15 inches apart ( I think) and are about roughly .1 inches wide.
The top is ground and SCL and the bottom is power and SDA. I can wire the items in eagle. But I don't know how to create pads that occupy the same area but on the top is one pad and on the bottom is a different pad.
Meanwhile...2 days later....I found some helpful links including a schematic that has 2 nunchuk breakouts:
Schematic and board are referenced here:
Re: Nunchuk Eagle
Sep 12, 2013, 05:16 am
Created this dual nunchuk tindie project: https://www.tindie.com/products/Paulware/dual-nunchuk-shield/