Go Down

Topic: aMTP32M - help with bit clock (Read 2465 times) previous topic - next topic

Nick Gammon


A simple layout follows. of course, it does not have the schematic for the board the aMTP32M is mounted on, but I am going pin-to-pin.


When I said "exact wiring" I had in mind that you would show the exact wiring.

Not omitting ground, +5V, reset pin and so on. One of the pins that you don't think is important might in fact be the clue to the whole thing.
Please post technical questions on the forum, not by personal message. Thanks!

More info:
http://www.gammon.com.au/electronics

Go Up