Loading...
Pages: [1]   Go Down
Author Topic: Where to get 4-digit 7-segment LED with decimal points and colon 0.56" digits?  (Read 831 times)
0 Members and 1 Guest are viewing this topic.
Central MN, USA
Online Online
Faraday Member
**
Karma: 35
Posts: 5949
Phi_prompt, phi_interfaces, phi-2 shields, phi-panels
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

I have a design that needs  4-digit 7-segment LED with decimal points and colon 0.56" digits. I looked on ebay and there seems to be only 2 sellers that sell these (yeah, some are aliases of the same sellers). One has the wrong connection diagram. I got a sample from them and the decimal points don't work. The other seller doesn't even offer connection diagram and just claims all the dots work. Should I trust them? I also looked at digikey and sparkfun but they don't have large enough digits. If you have used such display (both decimals and colons have to work), can you suggest a source of this display? Thanks.

My only one suggestion received from GoForSmoke:

http://www.futurlec.com/LED/7FR5643AS.shtml

This is common cathode and there's only one color so I wonder if there are other ones and common anode ones out there I just don't know. Thanks.

Logged


0
Offline Offline
Edison Member
*
Karma: 6
Posts: 1398
Arduino rocks
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

These ones look pretty close:
http://www.sparkfun.com/products/9482
Logged

Central MN, USA
Online Online
Faraday Member
**
Karma: 35
Posts: 5949
Phi_prompt, phi_interfaces, phi-2 shields, phi-panels
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Just a bit small. I will have to use them if I can't find the larger ones.
Logged


Grand Blanc, MI, USA
Offline Offline
Faraday Member
**
Karma: 43
Posts: 2518
"We're a proud service of the Lost Electricity Reclamation Agency"
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Pretty hard to find the colons, I've spent more than a little time looking myself. Tayda sells some that are visually almost identical to those that Sparkfun sells, but the connection is just a bit different, and they're common cathode. But like the Sparkfun displays, they are 0.4". Both are good quality displays, very crisp and they don't need a lot of current.

I'd really like to find a part with six digits or more so I could have 88:88:88, etc., but they just don't seem to be out there. A two-digit part with a colon would also work by stacking them.

Let us know if you turn anything up.
Logged

Get the infamous "One Million Ohms" board at tINDIE.com: http://tinyurl.com/BuyMohms

Central MN, USA
Online Online
Faraday Member
**
Karma: 35
Posts: 5949
Phi_prompt, phi_interfaces, phi-2 shields, phi-panels
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Will do. If I find anything useful, I'll post where I get them.
Logged


Offline Offline
Newbie
*
Karma: 0
Posts: 18
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

these http://www.taydaelectronics.com/led-displays/led-display-7-segment-4-digit-0-56-inch-common-anode-ultra-red-21937ucd.html might fit what you need.
Logged

0
Offline Offline
Full Member
***
Karma: 1
Posts: 172
www.rocketscream.com
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

http://www.satistronics.com/10pcs-056-inch-four-digital-led-display_p1477.html

Can select common cathode or anode too when purchase. But only red.
Logged

Global Moderator
Boston area, metrowest
Offline Offline
Brattain Member
*****
Karma: 249
Posts: 16579
Available for Design & Build services
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Check out kingbright LEDs.
http://www.kingbrightusa.com/category.asp?catalog%5Fname=LED&category%5Fname=KC4%2DDigit+0%2E56in&Page=1
Whole series of common anode, common cathode, different colors.
Logged

Designing & building electrical circuits for over 25 years. Check out the ATMega1284P based Bobuino and other '328P & '1284P creations & offerings at  www.crossroadsfencing.com/BobuinoRev17

Pages: [1]   Go Up
Print
 
Jump to: