Pages: [1]   Go Down
Author Topic: Pressure sensor - Changing colours of RGB LED  (Read 1385 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 42
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Has anyone got any good tutorials for a pressure sensor? The harder you press it would change the colour?

Thanks
Logged

Global Moderator
Netherlands
Offline Offline
Shannon Member
*****
Karma: 168
Posts: 12417
In theory there is no difference between theory and practice, however in practice there are many...
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

what kind of pressure do you want to read?
What is the range?
What is the #samples per second/hour?

What do you consider a good tutorial? I don't know your background so please tell if you are familiar with SW (what) hW (what) etc.

with respect to the colors, this might be ina interesting read - http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1207331496 -
Logged

Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

Global Moderator
Netherlands
Offline Offline
Shannon Member
*****
Karma: 168
Posts: 12417
In theory there is no difference between theory and practice, however in practice there are many...
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Quote
I think a good tutorial would be showing where the pins, wires etc goes on the breadboard.
You will like this one - http://www.earthshineelectronics.com/files/ASKManualRev5.pdf - I think
Logged

Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

Pages: [1]   Go Up
Jump to: