Go Down

Topic: Want 3v graphic back lit lcd with a resolution from 128 X 128 to 160 x 160 (Read 1 time) previous topic - next topic

adder

I am trying to find a 3v graphic back lit lcd with a resolution from 128 X 128 to 160 x 160, with built in controller that has an arduino graphics lib for it and hopefully not too expensive. :smiley-red:

I have been searching for quite awhile and cant find any that fulfil my specs especially the 3v with the pixel count.
Am I looking in vain or can someone point me in the right direction?

Moderator edit: Thread title made more meaningful. (Nick Gammon)
One crowded hour of glorious life  Is worth an age without a name.  (Thomas Mordaunt 1730-1809)

Wazzled

First, why such as vague thread title?  "Newbie help needed" will likely getting ignored by a lot of the people on here.

If your looking for an LCD with an Arduino lib (implying that your using Arduino to control it) why does it need to be 3v?

When trying to get help sourcing components, it's also useful to tell people where you are in the world.

CrossRoads

Try looking here, lots of options
www.newhavendisplay.com

Adding geographical into to  your profile will help also, as Wassled suggested.
Designing & building electrical circuits for over 25 years. Check out the ATMega1284P based Bobuino and other '328P & '1284P creations & offerings at  www.crossroadsfencing.com/BobuinoRev17.
Arduino for Teens available at Amazon.com.

adder

Thanks crossroads, there are some there I can use.  :D
I had been looking at crystalfontz.
I live in Australia and didn't mention it as I haven't got round to filling my profile (it was my first post).
Wassled. The topic chosen was because I was trying not to be too pushy so as not to upset anyone as it was first post.
The reason for 3v. Job requires small long lasting small battery and plan to use Arduino Pro 3.3v board for prototyping.
I thought listing requirements was sufficient.
One crowded hour of glorious life  Is worth an age without a name.  (Thomas Mordaunt 1730-1809)

adder

OK Profile filled in. Now you can see I'm a cranky old man living in Australia who loves diving. :)
One crowded hour of glorious life  Is worth an age without a name.  (Thomas Mordaunt 1730-1809)

CrossRoads

Maybe you can check with member Packhorse, he made a diving display unit a while back.
If not, some the other folks down under might have suggestions on sources that won't cost an arm and a leg for shipping.
Designing & building electrical circuits for over 25 years. Check out the ATMega1284P based Bobuino and other '328P & '1284P creations & offerings at  www.crossroadsfencing.com/BobuinoRev17.
Arduino for Teens available at Amazon.com.

pYro_65


Sacman

I actually have one of those linked above. If you can put up with the rather large breakout (2" x 2"), this is a great display. They have a great library already written for it that you can download from their website which goes beyond many by including bevels and gradients.

If space is a consideration, you can also look at the ones on adafruit. They have a 128x160 that has a great library as well.
Luck,

Wade

Mr_arduino

Here is a 160x160 graphic lcd that runs on 3.3v
http://www.topwaysz.com/en/msg.php?id=238

Go Up