Go Down

Topic: avrdude: stk500_getsync(): not in sync: resp=0x00 Error (SOLVED) (Read 13121 times) previous topic - next topic

Nick Gammon

Please post technical questions on the forum, not by personal message. Thanks!

More info:


Tell us about the resistors you used.

I have not used resistors, well only VRBot, one photo:

This device and two leds in pins 9 and 8.


Hi again

The problem was bootloader.

I found this tutorial and it solved the problem:


Don't need more boards or programmers, is great.

Thanks all for the help and replys!


i found a different solution to the stk500_ ... error, but don't know where to post it.
somebody pointed out to the young fellow that he was in the wrong place to discuss this, but i didn't see a direction to where he should be.
how about telling me so i can post what worked for me.


I got the same error that means arduino board is not communicating with the pc or there is something wrong in the bootloader what i did to resolve this issue was checking weather the arduino board and the communication port is correctly selected or not then i re-extracted the arduino-1.5.6-r2 and the sketch got uploaded


I have the same issue but i have an Arduino Uno
Do you  have any solutions ??

Go Up

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

via Egeo 16
Torino, 10131