Go Down

Topic: Powering a model elevator with an H Bridge (Read 2428 times) previous topic - next topic

Quote

The 2N2907 isn't great at saturation beyond about 100mA, BTW, it may just be the wrong part for the job.


I read about the performance of the transistors here: http://www.robotroom.com/BipolarHBridge4.html

Quote

it may just be the wrong part for the job.


According to tests on the web (I included a link to one below), 2N2907s seem to work. However, based on the fact that the transistors are heating up so much, I definitely agree with you on the saturation issue. The models I used for making the H bridge never mentioned an Arduino, so the resistors recommended there are probably for a higher amplitude current.

http://www.robotroom.com/BipolarHBridge.html

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy