Pages: [1]   Go Down
Author Topic: 1 arduino +1 ethernet shield +1 relay shield, how to ?  (Read 1331 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 1
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

hello
I recently bought arduino boards and I am still testing with it and its SDK, and I have the following

Arduino uno
ehternet shield
relay shield v1.3

I just need to control this relay using a web page and turn it on/off. I need guidance on how to connect the three boards together (just putting them over each other?) and what would be the modifications for the webServer example that comes with the SDK..A 101-for dummies tutorial  would be great.. thanks alot
« Last Edit: June 18, 2012, 07:13:20 pm by newstargate » Logged

Offline Offline
Newbie
*
Karma: 1
Posts: 15
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

HI I DID THE SAME THING.
A quick way and you can clean up code if neded, is to use the built in examples for turning the led on or off, but instead of the led hook up the "sens" pin to i believe its pin 4 in the code. Use a 5v arduino based or 5v ready relay. its real easy you would use a relay like you can find on here http://s.dealextreme.com/search/arduino+relay?r.22337885
Good luck
HANKENSTIEN
Rduino.com
« Last Edit: June 28, 2012, 01:17:56 am by HANKENSTIEN » Logged

Pages: [1]   Go Up
Jump to: