Pages: [1]   Go Down
Author Topic: Documentation error in Main/Standalone  (Read 391 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 6
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

In this paragraph: "Finally, add the LED. The long leg or the cathode connects to the red wire and the short leg or the anode connects to the 220 ohm resistor going to ground.", the words anode and cathode must be swapped.
Logged

Pages: [1]   Go Up
Jump to: