Testing out the mux it seems to be wired a little funky.
D1Out, D2Out, D3Out select which mux input is routed to A0
D4Out Controls the mux enable
Whats unexpected:
- D4Out is directly connected to bottom Mux rather than top (D4Out=0 should select top 4051)
- Mux inputs not same order as 595 outputs
D1Out 595 LSB A15In 4051
D2Out A14In
D3Out A13In
D4Out This controls mux enable A12In MSB
D5Out A11In
D6Out A10In
D7Out A9In
D8Out A8In
D9Out 595 MSB A7In
D10Out A6In LSB
D11Out A5In
D12Out A4In
D13Out A3In
D14Out A2In
D15Out A1In
D16Out A0In
I'm going to respin the board to correct these two issues.
Other than that it seems to look pretty good.
