Go Down

Topic: IR Hex usage for PROJECTOR-B-GONE (Read 1 time) previous topic - next topic

conmor

Hi there, I am fairly new to arduino but understand some of it, and was wondering some things for a project that I was planning on making. I wanted to make a device that can use hex codes (hopefully directly, without conversion to binary or whatnot) to blink a 940nm IR led, and therefore controlling the device. I read http://arduino.cc/forum/index.php/topic,19312.0.html, but did not understand how they took the hex codes and converted it into binary's 1's and 0's. Could someone help walk me through that? and I also wanted to know what the sketch might look like afterwards. But here is the code that I want to use:
Code: [Select]
0000 006A 0000 0002 0000 00B0 0000 0016 0000 0016 0000 0017 0000 0042 0000 0042 0000 0016 0000 0016 0000 0017 0000 0042 0000 0016 0000 0016 0000 0042 0000 0016 0000 0042 0000 0042 0000 0042 0000 0016 0000 0017 0000 0042 0000 0017 0000 0042 0000 0016 0000 0016 0000 0017 0000 0042 0000 0042 0000 0016 0000 0042 0000 0016 0000 0042 0000 0042 0000 0042 0000 05D4 0000 0058 0000 0E50 This codes' link is: http://www.remotecentral.com/cgi-bin/codes/nec/mt600-mt800/. Any ideas? Thanks very much for your help.

Cmor

johnwasser

This page tells you what the data in a "Pronto hex format" file means:

http://www.remotecentral.com/features/irdisp2.htm
Send Bitcoin tips to: 1L3CTDoTgrXNA5WyF77uWqt4gUdye9mezN
Send Litecoin tips to : LVtpaq6JgJAZwvnVq3ftVeHafWkcpmuR1e

Go Up