FT232R USB UART: ID do produto: 0x6001 ID do fabricante: 0x0403 (Future Technology Devices International Limited) Versão: 6.00 Número de série: A600JRD9 Velocidade: Até 12 Mb/seg Fabricante: FTDI ID da localização: 0x04100000 / 2 Corrente disponível (mA): 500 Corrente necessária (mA): 90
Is there any way to see all tty. devices on the mac to see if it is recognesed?
On linux I can do something like tail -f /var/log/messages
Is there any similar command on mac?
Problem solved It really need to install the FTDI drivers.I found this tuturial and works greathttp://geekscape.posterous.com/mac-os-x-17-lion-upgrading-ftdi-usb-serial-dr
1) unplug from the Arduino the power cable (if being used) and USB cable; all power needs to be removed from the Arduino 2) quit the IDE if it's running 3) re-attach the USB cable to the Arduino (***but don't attach the Arduino power cable yet***)4) restart the IDE
Please enter a valid email to subscribe
We need to confirm your email address.
To complete the subscription, please click the link in the
email we just sent you.
Thank you for subscribing!
via Egeo 16