Pages: [1]   Go Down
Author Topic: GLCD Troubleshooting  (Read 791 times)
0 Members and 1 Guest are viewing this topic.
0
Offline Offline
Newbie
*
Karma: 0
Posts: 8
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi,
I've got KS0108 GLCD connected to the Arduino (Seeeduino - 100% Arduino Diecimila compatible) wired as a common Pinout B panel according to this arduino.cc/playground/Code/GLCDks0108 It supposed to have two lines moving, one from top to the bottom, second one from left to right. LCD is 100% properly connected, but picture is garbled. Any suggestions how to fix it?

GLCD model: LM12864M

Please see picture below along with links to its manual and video.

Thank you in advance!!!
Logged

0
Offline Offline
Newbie
*
Karma: 0
Posts: 8
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

GLCD manual here: http://www.topwaydisplay.com/Pub/Manual/LM12864MBC-Manual-Rev0.1.pdf

Video here:
Logged

0
Offline Offline
Newbie
*
Karma: 0
Posts: 9
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I have the same problem with a lcd form futurlec

I can see what it is trying to render, but the picture is all scrambled

I have checked the wiring many times, but it is fine.
Followed the tutorial on the playground
« Last Edit: December 20, 2008, 07:55:12 pm by jossi » Logged

Visit my blog and see my fantastic robot

0
Offline Offline
Newbie
*
Karma: 0
Posts: 9
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Link to the above LCD
http://www.futurlec.com/LED/BLUE128X64LCD.shtml
Logged

Visit my blog and see my fantastic robot

London
Offline Offline
Faraday Member
**
Karma: 8
Posts: 6240
Have fun!
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

varOn, You have asked the same question in another thread.

It's not good to double post. People put a lot of time into responding to requests here and its unfair for someone to go to the effort to find a solution to a quesiton in one thread when it has already been answered in another. Its also helps people experiencing similar problems if all the relevant help is in one place.

I have replied to your post here: http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1229827383/

Logged

0
Offline Offline
Newbie
*
Karma: 0
Posts: 8
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Yeah! Sorry people! When I was posting this topic I thought I'm in Troubleshooting section. But then realized that I'm not!
   Anyone who had similar problem or anyone who know the solution please follow this link http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1229827383
Logged

Pages: [1]   Go Up
Jump to: