Go Down

Topic: wi-shiled doesn't works in infra mode (Read 499 times) previous topic - next topic

jonyjakee

hi, i am connected my wi-shiled's wifi signal to my laptop wifi in adhoc mode. but when i program with infra mode, my wi-shiled indicator led itself not glowing and i couldnt see my wishiled's wifi signal name in my laptop.

And also i couldnt set the security WEP or WPA, WPA-2.

please help me to connect with the security and also to connect to my android phone.

Quote

/*
* A simple sketch that uses WiServer to serve a web page
*/


#include <WiServer.h>

#define WIRELESS_MODE_INFRA   1
#define WIRELESS_MODE_ADHOC   2

// Wireless configuration parameters ----------------------------------------
unsigned char local_ip[] = {192,168,43,9};   // IP address of WiShield
unsigned char gateway_ip[] = {192,168,43,1};   // router or gateway IP address
unsigned char subnet_mask[] = {255,255,255,0};   // subnet mask for the local network
const prog_char ssid[] PROGMEM = {"androidAP7925"};      // max 32 bytes
int ON, OFF;
unsigned char security_type = 0;   // 0 - open; 1 - WEP; 2 - WPA; 3 - WPA2

// WPA/WPA2 passphrase
const prog_char security_passphrase[] PROGMEM = {"12345678"};   // max 64 characters

// WEP 128-bit keys
// sample HEX keys
prog_uchar wep_keys[] PROGMEM = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d,   // Key 0
              0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,   // Key 1
              0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,   // Key 2
              0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00   // Key 3
            };

// setup the wireless mode
// infrastructure - connect to AP
// adhoc - connect to another WiFi device
unsigned char wireless_mode = WIRELESS_MODE_ADHOC;

unsigned char ssid_len;
unsigned char security_passphrase_len;
// End of wireless configuration parameters ----------------------------------------


// This is our page serving function that generates web pages
boolean sendMyPage(char* URL) {
 
   // Check if the requested URL matches "/"
   if (strcmp(URL, "/") == 0) {
       
       WiServer.print("<html>");
       WiServer.print("<center>hi</center>");
       WiServer.print("</html>");
       return true;
   }
}


void setup() {

 WiServer.init(sendMyPage);
 Serial.begin(57600);
 WiServer.enableVerboseMode(true);

}

void loop(){

 // Run WiServer
 WiServer.server_task();
}




PaulS

Quote
hi, i am connected my wi-shiled's wifi signal to my laptop wifi in adhoc mode. but when i program with infra mode, my wi-shiled indicator led itself not glowing and i couldnt see my wishiled's wifi signal name in my laptop.

The physic took the summer off. We don't play guessing games without the physic to give us a fair chance.

Which WiFi shield are you talking about?

jonyjakee

Quote
Which WiFi shield are you talking about?


wi-shield 2.0 is what i am using.

PaulS

Quote
wi-shield 2.0 is what i am using.

31 posts and you still can't provide a link? I'm beginning to get the impression that you don't really want help.

jonyjakee

hi pauls, i apalogise for my poor english. i am not getting you many times. i think this is the link what you expect.

http://asynclabs.com/store?page=shop.product_details&product_id=26&vmcchk=1 :smiley-roll:

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy