Pages: [1]   Go Down
Author Topic: LCD DV-24200-S1FBLY (KS0066 chip)  (Read 819 times)
0 Members and 1 Guest are viewing this topic.
0
Offline Offline
Newbie
*
Karma: 0
Posts: 25
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I have a bunch of these Data Vision DV-24200-S1FBLY LCD modules. They are 24x2 displays with a 14-pin interface. The information I've seen indicates that the KS0066 chip used on them is HD44780 compatible. Links to some data:

Product at Data Vision Website

Datasheet

I also have some 20x4 displays from a different manufacturer that I have been using successfully in 4-bit mode with the LiquidCrystal library. The pinout for both of the displays is the same.

When I plug in the DV-24200, all I get is garbled junk.

I have been over the connections several times to make sure the right pins are connected to the right places, and all seems in order.

Any suggestions from the hive mind?

Thanks.
Logged

0
Offline Offline
Newbie
*
Karma: 0
Posts: 2
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi, I also have a Datavision 24x2 lcd display, I wire it up with 4 wire method. Everything works ok but it only display 8 characters, in both lines.

An ascii art showing it:

if I send the string: "12345678aaaaaaaaaaaaaaaabbbbbbbbbbbbbbbbbbbbbbbb"

Only displays this:

12345678
bbbbbbbb

Any sugestion?

I'm using arduino IDE 0012, freeduino 1.22 and the sample "Serialdisplay.pbe" and "helloworld.pbe" with same result in both.

Thanks
Logged

Pages: [1]   Go Up
Jump to: