Pages: [1]   Go Down
Author Topic: ArduinoBT: upgrade from 168 to 328?  (Read 336 times)
0 Members and 1 Guest are viewing this topic.
Kentucky, US
Offline Offline
Full Member
***
Karma: 1
Posts: 193
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

I can't think of any reason why I cannot replace the ATmega168P-AU on a BT board with ATmega328P-AU.  I would flash the 328's bootloader using the Arduino IDE through the ICSP header.  I would use ArduinoISP as the programmer (I have a dedicated Duemilanove set up for this purpose).  Has anyone upgraded an Arduino BT like this successfully, or unsuccessfully?

I apologize if this has been answered, but my search only showed this old, unanswered post:
http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1286427603

Thanks in advance.

Jim
Logged

TC4 Open Source Digital Thermometer and Temperature Controller
http://code.google.com/p/tc4-shield

Massachusetts, USA
Offline Offline
Tesla Member
***
Karma: 202
Posts: 8711
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Just select "Arduino BT w/ ATmega328" when you burn the bootloader.
Logged

Send Bitcoin tips to: 1L3CTDoTgrXNA5WyF77uWqt4gUdye9mezN
Send Litecoin tips to : LVtpaq6JgJAZwvnVq3ftVeHafWkcpmuR1e

Kentucky, US
Offline Offline
Full Member
***
Karma: 1
Posts: 193
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

 I saw that was an option. Thanks.

Jim
Logged

TC4 Open Source Digital Thermometer and Temperature Controller
http://code.google.com/p/tc4-shield

Pages: [1]   Go Up
Jump to: