Go Down

Topic: Which ATmega328 (blank) from DigiKey? (Read 1 time) previous topic - next topic

BlueJakester

Jul 30, 2012, 05:54 pm Last Edit: Jul 30, 2012, 06:36 pm by BlueJakester Reason: 1
I've tried to research the difference between the ATmega328P-PN and the ATmega328P-PU. I've read through the datasheet and done a bunch of searching. I think there is some difference regarding operating temperature range and possibly power consumption.

Now that I can burn my own boot-loaders I wanted to buy some blank ATmega328 chips from Digikey, but have held back because I read something about the "fuse" settings being different between different versions. I'm wanting to burn the Uno or Duemilanove boot-loaders on the chips, it doesn't matter which.

If I could be confident about the correct DigiKey part to order I'd get 25 of them and take advantage of the quantity discount. Thanks for any help in ordering the correct chip.

Jake

magagna

I think the N version has a higher operating temperature.

If you get the 328p-pu (your second link) you'll have the same chip that's in the Uno and Duemilanove, so you should be able to burn their bootloaders to blank chips with no fuse changes.

Gold luck!
http://en.wiktionary.org/wiki/magagna <-- My last name.  Pretty apt.

BlueJakester


hoff70

FWIW,

The chip's that I ordered from sparkfun are 328P-PU with a #1107 on them. They work fine with no fuss but I have to chose one of the older boards in the menu. The chip that came in my UNO has a # 1123 on it.

BlueJakester


CrossRoads

Datasheet dated Rev. 8271D-AVR-05/11 for:
ATmega48A
ATmega48PA
ATmega88A
ATmega88PA
ATmega168A
ATmega168PA
ATmega328
ATmega328P

Section 33.8 ATmega328P:
ATmega328P-PU  Industrial (-40°C to 85°C)

ATmega328P-PN Industrial (-40°C to 105°C)
Designing & building electrical circuits for over 25 years. Check out the ATMega1284P based Bobuino and other '328P & '1284P creations & offerings at  www.crossroadsfencing.com/BobuinoRev17.
Arduino for Teens available at Amazon.com.

Marvin Martian


FWIW,

The chip's that I ordered from sparkfun are 328P-PU with a #1107 on them. They work fine with no fuss but I have to chose one of the older boards in the menu. The chip that came in my UNO has a # 1123 on it.


Those extra numbers are manufacture dates in the form 7th (or 23rd) week of 2011 - this is a common stardard on most components.

Go Up
 

Quick Reply

With Quick-Reply you can write a post when viewing a topic without loading a new page. You can still use bulletin board code and smileys as you would in a normal post.

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.
Name:
Email:

shortcuts: alt+s submit/post or alt+p preview