Go Down

Topic: Arduino Bios Programmer (Read 2501 times) previous topic - next topic


I need help trying to re-flash a bios chip, I looked it up on the internet and I've only found completed projects being showed, not any instructions. Can you please tell me which Arduino ports I connect this chip to: [link]http://pdf1.alldatasheet.com/datasheet-pdf/view/47677/WINBOND/W55F10.html[/link]

Also how do I program the chip with the Asus bios?
Technician at Yuneec Electric Aviation


From this datasheet for the part:


I'd have to say, I don't know!

I would guess you could connect it to any 6 pins you wanted and then bit-bang out the transfers, possibly 32 bits at a time, with the up to 128K of data ( 1 Mbit for the W55F10) coming in from a PC.
The different Modes are not explained at all. Perhaps more data is available on the datasheets for these other parts:
"The W55FXX is a serial input/output flash EEPROM series that is typically used as the memory cell
of a W51300 (voice recorder controller) or the ROM code emulator for the PowerSpeechTM series."

Try searching the Playground for a Library for this part, maybe you'll get lucky.  If not, you need to do some more research more first.
Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.


I can't really find any information on this, I've tried to research it but I'm confused.
Technician at Yuneec Electric Aviation

Go Up

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

via Egeo 16
Torino, 10131