Go Down

Topic: Duvida no programa de modulo gps (Read 393 times) previous topic - next topic

Kotch

//The default digital driver pins for the GSM and GPS mode
//If you want to change the digital driver pins
//or you have a conflict with D3~D5 on Arduino board,
//you can remove the J10~J12 jumpers to reconnect other driver pins for the module!
byte gsmDriverPin[3] = {3,4,5};

void setup(){
  InitGpsMode();
}

void InitGpsMode(){
  //Init the driver pins for GSM function
  for(int i = 0 ; i < 3; i++){
    pinMode(gsmDriverPin,OUTPUT);
  }
  digitalWrite(3,HIGH);//Disable the GSM mode
  digitalWrite(4,LOW);//Enable the GPS mode
}

void loop(){
}


como o programa a cima mostra os dados a baixo na porta serial? Qual linha do programa faz esta mostra?


$GPRMC,221621.803,V,,,,,,,030812,,,N*4A
$GPVTG,,T,,M,,N,,K,N*2C
$GPGGA,221622.803,,,,,0,00,,,M,0.0,M,,0000*5A
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPRMC,221622.803,V,,,,,,,030812,,,N*49
$GPVTG,,T,,M,,N,,K,N*2C
$GPGGA,221623.803,,,,,0,00,,,M,0.0,M,,0000*5B
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPRMC,221623.803,V,,,,,,,030812,,,N*48
$GPVTG,,T,,M,,N,,K,N*2C
$GPGGA,221624.803,,,,,0,00,,,M,0.0,M,,0000*5C
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPRMC,221624.803,V,,,,,,,030812,,,N*4F
$GPVTG,,T,,M,,N,,K,N*2C
$GPGGA,221625.803,,,,,0,00,,,M,0.0,M,,0000*5D
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPRMC,221625.803,V,,,,,,,030812,,,N*4E
$GPVTG,,T,,M,,N,,K,N*2C
$GPGGA,221626.803,,,,,0,00,,,M,0.0,M,,0000*5E
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPGSV,3,1,12,10,60,263,,13,52,115,,07,51,171,25,08,51,242,*73
$GPGSV,3,2,12,28,32,338,,23,28,078,,05,16,222,,19,11,091,*7C
$GPGSV,3,3,12,04,09,307,,03,08,122,,20,08,022,,02,05,271,*70
$GPRMC,221626.803,V,,,,,,,030812,,,N*4D
$GPVTG,,T,,M,,N,,K,N*2C
$GPGGA,221627.803,,,,,0,00,,,M,0.0,M,,0000*5F
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPRMC,221627.803,V,,,,,,,030812,,,N*4C
$GPVTG,,T,,M,,N,,K,N*2C
$GPGGA,221628.803,,,,,0,00,,,M,0.0,M,,0000*50
????????????????????

Kotch

????????????????????

Go Up