Go Down

Topic: Attiny 85 Upload error (Read 602 times) previous topic - next topic

John_S

Hi all, I get an error message trying to upload to an ATtiny85. I've just installed the IDE 1.0, and the Attiny files from http://code.google.com/p/arduino-tiny/.

I've selected "Attiny85 @ 8MHz (internal oscillator)" then burned the bootloader.
My code compiles for a Uno, but when I compile or attempt an upload for an '85 I get this error message:

Quote
c:/program files/arduino-
.0.1/hardware/tools/avr/bin/../lib/gcc/avr/4.3.2/../../../../avr/lib/avr25/crttn85.o:(.init9+0x2): relocation truncated to fit: R_AVR_13_PCREL against symbol `exit' defined in .fini9 section in c:/program files/arduino-1.0.1/hardware/tools/avr/bin/../lib/gcc/avr/4.3.2/avr25\libgcc.a(_exit.o)


Any solutions?

I'm using a Uno as ISP, and the preferences are set to "upload.using=arduinoisp" and under Tools>Programmer, I have Arduino as ISP.

My I can attach my (super long, minimal comments, messy, and hard to follow) code if it's needed. I would've pasted it here, but it's too long :~
http://jsrintervalometers.blogspot.ca

Tom Carpenter

See my thread about the PCREL error:
http://arduino.cc/forum/index.php/topic,116674.0.html

Its nothing wrong with your code, but rather a bug in the linker, the fix for which is not included in Arduino but can be applied as explained in that thread.
~Tom~

John_S

It works now! Many thanks  :)
http://jsrintervalometers.blogspot.ca

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy