Loading...
« previous topic   next topic »
Pages: [1]   Go Down
Author Topic: Pro Mini 5v/16mhz + Adafruit ks0108 LCD  (Read 392 times)
0 Members and 1 Guest are viewing this topic.
5errated
Offline Offline
Newbie
*
Karma: 0
Posts: 26
View Profile
« on: August 10, 2012, 11:25:05 pm »
 Bigger Bigger Smaller Smaller Reset Reset
The pro mini has the same pinout as the uno as far as I was aware, yet it won't work with my ks0108 LCD.  I've triple checked the wiring and still can't get it working for some reason.  Any ideas where to start looking?  I'm using the glcd3 linked from the arduino wiki for the ks0108.
Logged

5errated
Offline Offline
Newbie
*
Karma: 0
Posts: 26
View Profile
« Reply #1 on: August 10, 2012, 11:47:02 pm »
 Bigger Bigger Smaller Smaller Reset Reset
Resolved!

Moved the EN pin from A4 to A5 and moved the pin number up one in the ks0108_Arduino.h file on line 49.

Original: #define glcdEN           18
Fixed: #define glcdEN           19

Not sure why A4 isn't working for this but I guess it works so no complaints from me.
Logged

Pages: [1]   Go Up
Print
« previous topic   next topic »
 
Jump to: