Go Down

Topic: [MOD] Arduino Enhanced Release 1.0.5 for Windows (installer, drivers, etc) +SRC (Read 257 times) previous topic - next topic

eried

cyclegadget, for sure I can add that but I need more details.

I don't use any of these functions (I use "copy hex file to clipboard" and then paste it in an external programmer app, then only click verify and upload in my external app) so I need to know the process completely, how you do it now manually, what are the "pre" conditions, like com port should be selected? board selection changes something? etc, does the manual way shows some progress bar I need to parse into the ide? etc,etc better if you do some screencast recording


A "Reset" Button placed on the Serial Monitor window would be far more elegant.


That sounds better, will attempt to add a reset button in the next version. Also now I can add signed win 8 drivers :D so, no more warning
My website: http://ried.cl

cyclegadget


Eried, I did some research for the hex upload with Avrdude and here is what I have found so far.

A program with source code for uploading Hex files: http://playground.arduino.cc/Code/ArduinoUpload

Here is a thread that may give clues to the process: http://arduino.cc/forum/index.php/topic,37586.0.html

************************************qoute from anther thread************************************************************
Re: Upload Blink sketch using AVRDUDE command line

This is the comand line I've used:
avrdude.exe -V -F -C avrdude.conf -p atmega168 -c stk500v1 -P COM2 -b 57600 -U flash:w:Blink.cpp.hex -vvvv


I will be try to gather more information if you need it. Thanks for the efforts.

NicksonYap

#382
Feb 16, 2013, 01:52 pm Last Edit: Feb 16, 2013, 02:06 pm by NicksonYap Reason: 1
Hey,
There's a font from Adobe called Source Code Pro.
Very suitable for programming and coding.
Even the zeros have a dot in the middle so a capital "O" definitely looks like an "O".
More info:
http://blogs.adobe.com/typblography/2012/09/source-code-pro.html

In the preview, font size is set to 20.


Download:
http://store1.adobe.com/cfusion/store/html/index.cfm?store=OLS-US&event=displayFontPackage&code=1960

It's so good, you might want to include it in the Arduino ERW as the default font type.

You're welcome :P


eried


Hey,
There's a font from Adobe called Source Code Pro.
Very suitable for programming and coding.
Even the zeros have a dot in the middle so a capital "O" definitely looks like an "O".
More info:
http://blogs.adobe.com/typblography/2012/09/source-code-pro.html

In the preview, font size is set to 20.


Download:
http://store1.adobe.com/cfusion/store/html/index.cfm?store=OLS-US&event=displayFontPackage&code=1960

It's so good, you might want to include it in the Arduino ERW as the default font type.

You're welcome :P


Cool! I was looking for a new font without commercial license just this week
https://github.com/evilcorp/Energia/commit/f0a841cc1bbc871ab20ba51f71cc80121afa6c4b

haha :D will use this one, thanks
My website: http://ried.cl

Go Up