"C:\Program Files (x86)\Arduino\Arduino ERW 1.0.1i\erw\SetPath.exe" -a "<your winavr path>" -r hardware\tools\avr\bin
I'm not entirely sure what I'm supposed to do to fix the problem.I ran the command prompt line you posted (after filling in the WinAVR bin location). It seems to have removed the directory "C:\Program Files (x86)\Arduino\Arduino ERW 1.0.1i\hardware\tools\avr\bin" from that registry key I mentioned earlier, but it doesn't seem to help any more than me manually removing it.
I have WinAVR-20100110, and I don't run it from a command prompt (well, rarely I run avrdude from it). I use Programmer's Notepad, which is included with WinAVR, and i use the "Make All" and "Program" "buttons" in the Tools menu of pn.
Hello and thank you for this cool enhanced IDE, I'm using it since few weeks without problems I have a small suggestion (sorry if it has been asked already) when we click "New" or open any sketch, it open it in a new window, it would be nice if it opened in a new tab instead
I've noticed some strange behavior in tab navigating. When I first open the ide and use the keyboard shortcur (CNTRL + ALT + Arrow) for moving between tabs, if jumps two tabs at a time (either direction you choose).
Ah ok I see But isn't it possible that you create other tabs above the existing tabs?? The above tabs would be for differents sketches, like this for example:[sketch1][sketch2][sketch3][sketch4][graphic][loop][setup]
Please enter a valid email to subscribe
We need to confirm your email address.
To complete the subscription, please click the link in the
email we just sent you.
Thank you for subscribing!
via Egeo 16