Go Down

Topic: Is there a minimum current to charge a battery? (Read 1 time) previous topic - next topic

zenner

I have a 3.7v 100mA/h battery that i want to charge with a (very) small solar panel. The panel has an output of aprox 5V and at full sun, the current is about 1mA when charging the battery.
However i have my doubts that the battery is being correctly charger. The power that the battery outputs after a long charge with the panel seems much lower that the (theoretical) power the solar panel gives to the battery.  I know that some power is lost during charge but even so...

Anyway my question is:
Is there a minimum current to charge a battery?


kf2qd

Yes, because a battery has some internal leakage current that tends to discharge it over time. What I would suspect is that your panel is not optimised for maximum light collection and you are getting much less charge than you think you are getting.

jackrae

Open circuit voltage of a PV cell can be up to twice the output when under load.  Therefore it may be that your PV cell simply isn't giving enough volts to effect a realistic charge current.  I'd suggest you are looking for a cell that can deliver at least 15mA under load. So either your cell is damaged or simply not up to the job ("very small")

oric_dan

Quote
3.7v 100mA/h battery


Duh, that's not much help. 100mAhr is a tiny battery. Is it even rechargeable?

What you should do is to search the web for info on the specific battery chemistry
of what you have you have, and see what they say.

You'll probably find something like Q/10 [whatever] minimum, to keep the battery
from self-discharging. So your solar cell is probably too small, even for your tiny
maybe-it's-rechargeable battery.

retrolefty

#4
Aug 23, 2012, 01:31 am Last Edit: Aug 23, 2012, 01:36 am by retrolefty Reason: 1
Well to answer your title question, there is no minimum charge current rating for any battery. As long as the charging source voltage is higher then the battery's voltage some current will flow and cause energy to be stored in the battery. However if charge current is only flowing say a few milliamps that would effectively be a 'trickle charge' more aimed at maintaining an existing charge rather then actually charging the battery, as it could take days depending on the MAH rating of your battery to reach full charge. Your stated 3.7vdc sounds like a LI cell, and what you have to be concerned about when charging it is that you cannot allow the cell's voltage to exceed 4.2 vdc no matter how small a charge current you happen to have flowing. Most proper LI cell chargers switch from a current control charging method to a constant 4.2vdc charging method when the battery reaches full charge to prevent damage or even fire. By the way most LI cells are rated for a maximum charge current of C/1, so a 100 mah cell could handle a 100ma charge current. There are higher performance LI cells that can take much higher charge rates, but you usually have to pay extra for that capability.

Lefty

Go Up