Pages: [1]   Go Down
Author Topic: joule thief tazer like device  (Read 731 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Edison Member
*
Karma: 4
Posts: 1730
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Here's a project I had made utilizing a scrap toroid and some wire
Using a 1k resistor, pn2222, 1w white led, AA battery,
Two turns primary 18ga, two turns secondary 18ga, HV winding about 50 turns 28ga
Wired the secondary and primary in the usual joule thief way, got about 130khz nearly square wave
took the HV winding(meter says about 11volts but its really more like 36 no load)
fed that into a 1KV rated cockcroft walton multiplier I made with 12 stages
I get just over 1200volts out of that smiley-lol


* 2012-08-23_20-21-28_968-1.jpg (18.55 KB, 556x244 - viewed 47 times.)
Logged

Offline Offline
Edison Member
*
Karma: 4
Posts: 1730
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Btw gives a good shock lol,
the joule thief draws 120ma from the battery,
very low ma output on the HV, drops to 0v if it has a load, but definetly a decent shock,
also I can make it positive or negative with the multipler due to a cool desi g that allows it to be reversed
Logged

0
Offline Offline
Jr. Member
**
Karma: 2
Posts: 51
Arduino - I have become the revolution.
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

He he he .. cool. Not very arduino-related though.
Logged

First we ignore them, then we make fun of them, then we fight them and then they win so let's cut the crap and just expose them for the corrupt liars they are.

Offline Offline
Edison Member
*
Karma: 4
Posts: 1730
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Not yet lol....
Logged

Pages: [1]   Go Up
Jump to: