I'm in a little dilemma with a voltage regulator. It's called LM317T
Here you have a link to it's datasheet:http://www.fairchildsemi.com/ds/LM/LM317.pdf
This is an example of a circuit: http://www.zen22142.zen.co.uk/Circuits/Power/lm317reg.gif
The R1 is 360 Oh and the R2 is 519 Oh. What I want is a voltage of 3V. In this case the math is saying that it should output 3.05, which is okay.
I've made the connections but what's giving me is almost always lower with 2 volts than the input. The resistors are fine, the bonds have no problem.
What is the problem with my wiring?
Here are some photo samples:
PS:The green resistor is the 519 Oh one, and the other one is 360.