Go Down

Topic: Advice on very simple project for newbie please. (Read 3461 times) previous topic - next topic

GRSP

Hi all,

I'm looking to create a very simple project as follows:

Using a VB NET project I want to switch on/off some leds.
I want the possibility of red, green or none.
Needs to be visible 5m across a normal office space.
Should have 360 degree visibility

I have a UNO board here but have no idea how to progress.. I don't really want to have to learn a lot about the technology, I just want to get the project working.

Thanks in advance.

PaulS

Quote
I'm looking to create a very simple project as follows:

Using a VB NET project I want to switch on/off some leds.
I want the possibility of red, green or none.

What part of this are you having issues with?

Quote
Needs to be visible 5m across a normal office space.
Should have 360 degree visibility

This is a matter of proper LED selection and positioning.

Quote
I have a UNO board here but have no idea how to progress.. I don't really want to have to learn a lot

That attitude is not going to get you very far.

GRSP

Hello

Well I really don't know where to start - even where to attach the LEDs.

I realise I was a bit blunt but isn't it best to be honest? I'm just looking for some help to get me going without having to understand everything...

AWOL

Quote
I'm just looking for some help to get me going without having to understand everything...

If you don't build some foundations by learning the basics, then you're always going to be coming back for more help.
People will get bored with that.
"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.

Grumpy_Mike

Quote
'm just looking for some help to get me going without having to understand everything...

Bad attitude.
Start understanding look here for a start.
http://www.ladyada.net/learn/arduino/lesson3.html

retrolefty

I read your requirement as:
I have a programmable Arduino board that I want to use in projects, but I don't want to have to learn how to program it, I just want it do what I want done. That's not going to be possible, best to sell your Arduino to someone else.

Lefty

 

GRSP


Quote
'm just looking for some help to get me going without having to understand everything...

Bad attitude.
Start understanding look here for a start.
http://www.ladyada.net/learn/arduino/lesson3.html


Thank's that is very helpful.


The rest of the posters here seem a rather grumpy unhelpful lot.........

scottyjr

Quote
The rest of the posters here seem a rather grumpy unhelpful lot.........


If you were to browse through just some of the many thousands of posts on these forums and noticed the abundance of patient, helpful replies from the same members that responded to your request for help, I think you would realize that they are not a 'rather grumpy, unhelpful lot'. To quote someone's words from a post of this thread:
Quote
isn't it best to be honest?


These guys give a  lot of their own time and vast knowledge of all sorts of technical areas. If you cannot comply with their methods of assistance then perhaps a member here can create what circuitry and code you need for a small fee or exchange. Just ask. - Scotty

GRSP


Quote
The rest of the posters here seem a rather grumpy unhelpful lot.........


If you were to browse through just some of the many thousands of posts on these forums and noticed the abundance of patient, helpful replies from the same members that responded to your request for help, I think you would realize that they are not a 'rather grumpy, unhelpful lot'. To quote someone's words from a post of this thread:
Quote
isn't it best to be honest?


These guys give a  lot of their own time and vast knowledge of all sorts of technical areas. If you cannot comply with their methods of assistance then perhaps a member here can create what circuitry and code you need for a small fee or exchange. Just ask. - Scotty


Yes they are grumpy, critical and superior. Just the sort of responses that drives people away - maybe that's what they want though - leave them alone in their little club??

Some are not giving any assistance at all so there's nothing for me to comply with., if they don't want to help me then there's no need to comment at all.

However if there is anyone around that woudl do the design & coding work for a fee I'd be very happy with that! The link I was given was very helpful & I just need a bit of help with .net now.

Boffin1

Hi Scotty jnr

Try contacting Crossroads, his signature says he is available for design / manufacturer, and hes not a grumpy guy at all :-)

Grumpy_Mike

Quote
maybe that's what they want though - leave them alone in their little club??

If you have spent any time looking at this forum you would know that it isn't true. However what you appear to be saying is "do my project for me and don't bother trying to teach me anything"

Occasionally we do have posters that say that and we would try and encourage you to change that attitude. After all we know how to do what you want, we know we can do it so there is no challenge, in fact no point in doing it for you.
What we love, absolutely love, is to help you to learn and come out of the experience with your arduino feeling great.

One poster said to me, "thanks for the help and also for allowing me the thrill of getting it right myself"

It is a thrill and I would like you to experience that. I think this video sums it up.

http://www.youtube.com/watch?v=9saYHg_JmWE

AWOL

#11
Aug 25, 2012, 08:49 pm Last Edit: Aug 25, 2012, 08:56 pm by AWOL Reason: 1
Quote
Hi Scotty jnr

Boffin1, it isn't Scotty with the problem here. Just thought you ought to know.

Quote
Some are not giving any assistance at all so there's nothing for me to comply with.

Of course, you don't count me in that group. After all, I moved your post to the correct section for you.

Quote
What we love, absolutely love, is to help you to learn and come out of the experience with your arduino feeling great.
Amen
"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.

Boffin1


GRSP

Hi,

Ok I take the point - I am sitting here surrounded by coloured flashing LEDs & yes it's a nice achievement.

My perspective is I am trying to achieve something specific, rather than earn to develop something else, in the search for what I want I came across Arduino. I realise that the capabilities of it are way more than I need, I just have no time to learn it all.

So, if I can start again, I now have the UNO doing what I want via the Arduino software - any tips on how to upload a program via .net? Preferrably visual basic?

Thanks

AWOL

Quote
any tips on how to upload a program via .net?

Why make things hard and reinvent the wheel?
Just use the IDE and avrdude will do the rest.
"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.

Go Up